Announcement

Collapse
No announcement yet.

panasonic tx 40AS640E

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    panasonic tx 40AS640E

    Hello to comunity
    I have PANASONIC TX40AS640E LED TV with dead mainboard TNPH1077(1)A, sticker code: TXN/A1JDVE suffix ES.
    I found a good board from TX40AS640B (TXN/A1DFVB) with same suffix ES.
    Boards are physically exactly the same. Will that board fit to this TV???
    Is that only a suffix that matters in PANA main boards? or TXN/Axxxx number also can give me problems?
    any experience?
    tnx for info in adv....Kristian

    #2
    Re: panasonic tx 40AS640E

    90% i would say it will work. It will probably have different settings , maybe extra USB. Its probably a different region board which means you might miss DVB-T tuner for example.....

    Are you sure the mainboard is dead? These sets are known for bad LEDS.
    I only repair Panasonic plasma tv's! Currently owning a TX-P55VT50 and still searching for a ZT60!

    Comment


      #3
      Re: panasonic tx 40AS640E

      Yes I know they have bad led panels...I had already 2 of them with bad leds...but this one respond to RC only with red blinking led but never goes to green :-(...I tried to mess with eeprom content but no joy...
      anyway tnx for answer

      Comment


        #4
        Re: panasonic tx 40AS640E

        Hi there,
        I think that the TX40AS640B is an UK model, so you may have a tuner issue. If you use the TV with a receiver you should not have any problem, but if you want to use it with it's internal tuner, then... you better find out more.

        Comment


          #5
          Re: panasonic tx 40AS640E

          the risk not taken
          I ordered new orig. board...expensive, but customer said YES :-)
          tnx....

          Comment

          Working...
          X