Cal51 la-f121p
rev : 1.0 (a00)
2018-02-08
dell İnspİron
p75f
p75f002
rev : 1.0 (a00)
2018-02-08
dell İnspİron
p75f
p75f002
-
Electronicman -
Re: La-f121p bİos dump help
Here you go . -
Re: La-f121p bİos dump help
Post your bios backup if you have it .Comment
-
ElectronicmanComment
-
Re: La-f121p bİos dump help
The first bios i posted is for the intel version,my mistake. Here`s the AMD bios version, i merged the bios update with your bios backup.
INSPIRON 5775 AMD BIOS + ECLast edited by SMDFlea; 11-29-2018, 08:55 AM.Comment
-
-
Re: La-f121p bİos dump help
i have the same unit bios password . have tried the above bios bin but not working. any help out there. revision is 1.0 (a00) . i have uploaded the locked file.Comment
-
Re: La-f121p bİos dump help
There is no attached file.OpenBoardView — https://github.com/OpenBoardView/OpenBoardViewComment
-
Re: La-f121p bİos dump help
hi sir....some one removed bios chip in motherboard....i need bios chip details....means 16mb fw or fv(1,8v or 3.3V)Comment
-
The Samsung S49CG934SU monitor does not power on - no LED indicator activity and no response to power button. However, when 21V power is connected, it immediately draws 0.8A of current with no display output. The motherboard processor gets warm, and there is continuous reading activity from the W25Q128BV BIOS chip.
Suspected Cause:
I suspect the BIOS may have been corrupted during a power interruption while updating the firmware. The official website provides firmware updates, but they can only be installed via USB flash drive.
Troubleshooting Attempts:
... -
Hello guys i really need help, i recently updated my DS-7208HGHI-K1 and it somehow got bricked, I've got it up and working now by flashing a new dump file i found but the serial number is really wrong and the uploader of the dump file probably intentionally did it.
I still have the bricked dump file is it possible to transfer the serial number of the "bricked dump" to the "working dump"? -
Hi everyone,
I’m looking for a 2 MB BIOS dump for a Lenovo IdeaPad 5 16ARH7H / Legion 5 with mainboard NM-E471 Rev. 2.0.
The BIOS chip is a Winbond W25Q16FW (1.8V, 2MB) and it's completely unresponsive / bricked. I tried recovery via USB but no success. Now I want to reflash it externally using a CH341A programmer.
I already found 32MB dumps (e.g. from Vinafix and Badcaps), but they are too large for the chip – and the last 2MB in those files are just FF FF FF....
✅ What I need:- A working 2MB BIOS dump
- Matching NM-E471 Rev. 2.0, e.g. JY575
-
Hello!
i got a damaged Manson NTP-5561 (60V, 1,6A DC output) and and the main issue is that the controler IC for the LCD display has a short. The controler IC PIC18F87K90 is mounted on the back of the back of the LCD. Vss-Vdd = 3 Ohm. The 5V and 3,3V power line was killed as well, but that is not a problem. A new LDO 3,3V and 5V 7805 is already ordered.
Replacing the PIC18F87K90 is necessary but that makes no sense without having the HEX dump of the new controler.
Does anybody have such a power supply and could do a HEX dump of the Flash and EEPROM memory?
...04-12-2025, 10:38 AM -
Hello all, as the title says, I'm very much in need of a valid firmware dump of a Anycubic Photon 5.5 3D resin printer. It's stored in a Winbond 25Q32, so it's 4Mbyte.
Here's a little background for my request. A few weeks ago I bought this 3D printer from a guy who had moved on to a PLA printer. I got it at a vey reasonable price, as it was in a defective state. The seller told me that he had experienced a power failure during a firmware upgrade, after which the printer appeared to be dead. He thought the firmware was corrupted in such a way that the printer was now bricked. As he...
Comment