Panasonic CF-H2 MK1
Bios = 8 MB
Bios = 8 MB
-
-
Re: Panasonic CF-H2 MK1 Bios bin
Did you test from your old thread?
https://www.badcaps.net/forum/showth...t=panasonic+CF -
Re: Panasonic CF-H2 MK1 Bios bin
it's a bios 16mb but i need a bios 8mb for mk1Comment
-
Re: Panasonic CF-H2 MK1 Bios bin
Many good bios expert here, usually them will asking your backup, for purpose comparing (also for educating) with official or even from dump backup.
Reno (rioreno) where are you?
Comment
-
Re: Panasonic CF-H2 MK1 Bios bin
it's a backup of the bios with password
Comment
-
Re: Panasonic CF-H2 MK1 Bios bin
Nothing ??Comment
-
Re: Panasonic CF-H2 MK1 Bios bin
Try this one .Comment
-
Re: Panasonic CF-H2 MK1 Bios bin
thank you, but it still asks for the passwordComment
-
Re: Panasonic CF-H2 MK1 Bios bin
Try this new one, i think i got it right this time.Comment
-
Re: Panasonic CF-H2 MK1 Bios bin
ok I will tryComment
-
Re: Panasonic CF-H2 MK1 Bios bin
power on but no display, thank you for your helpComment
-
Re: Panasonic CF-H2 MK1 Bios bin
i will try imranromi thank youComment
-
Re: Panasonic CF-H2 MK1 Bios bin
what utility to use for flashing ?Comment
-
Hello. I am asking you for a hint on how to solve the problem with my touchbook Panasonic CF53-2 standart model. After setting up the BIOS, the laptop displays the wrong image until Windows loads. (More precisely, it displays, but distorted, instead of the Panasonic image immediately after turning it on, it displays what is in photo #1 in the attached file) Then the image appears when Windows starts loading and then there are no problems with the screen until the reboot. If you enter the BIOS, just a black screen. If you connect an external screen, the image on it is the same as on the built-in... -
Good day,
I have tried to remove BIOS supervisor password from Panasonic Toughbook CF-33 mk1. Model number CF-33AENABTG, unfortunately I don't have any other info.
I read the BIOS using afuwin, edited it and tried to flash new edited BIOS using afuwin. Unsuccessfully. Afuwin showed "Error: Problem erasing flash." starting with 0x00040000 and stoped. Then I tried many other options to flash BIOS from Windows without any luck. Finally i rebooted the device - and no post. Afterwards I have read the corrupted bios chip (MX25L12873F) using EZP2010 programmer.... -
Hello everyone,
I recently bought a non-working Asus Zenbook Pro Duo OLED UX8402ZA that was listed for parts only. The seller mentioned that it had no display output but that the charging lights worked.
When the laptop arrived (without a charger and SSD), I connected a charger and confirmed with a multimeter that it was charging the battery. However, when I tried to power it on, only the backlight of the secondary display came on. There was no image, and it didn’t boot into the BIOS.
I decided to try flashing a new BIOS, but since I didn’t want to desolder... -
First of all thanks to all of our members who have posted previously all methods posted here.
Please leave a comment if you find something new,or have anything else to add.
-----------------------------------------------------------------------------------------
Find by serial number,model number or series
If you know the laptop serial or model number go to HP support https://support.hp.com/us-en/drivers/laptops .
Enter the serial number or model number and click submit.On the next screen you will have to enter the OS
Operating system and OS version.If... -
I usually try to figure these things out on my own but am asking for help now as I have been beating my head against a wall.
Backstory, I initially ended up with a CF20 Mk2 with a locked BIOS. I used aptio to read the BIOS and made the adjustments to the .rom file and attempted to write it back with aptio before reading other users problems with that setup. Well it bricked the BIOS go figure. Computer no longer boots, black screen. I found a clean BIOS on this forum but now I am having ME issues. So I would rather hand over the aptio dump(pre BIOS brick) and a hardware reader dump(post...
Comment