Hi everyone!I have samsung np270e4e-x06ph.The problem with this one boots up but stack on samung logo and restart so on.I have tried the bios here in this forum but when i relflashed cannot turn on it shows only green and bluelight but nothing on the screen.I have upload the original backup can someone fix for this please
samsung np270e4e BIOS problem
Collapse
X
-
-
-
Re: samsung np270e4e BIOS problem
Here is your dump with clean me.Attached FilesComment
-
Re: samsung np270e4e BIOS problem
@bachir2004 i tried your bios with clean me same as original before it boots with samsung logo and the restart with samsung logo and shows an error like this "All boot options are tired. Press<F4> key to recover with factory image using Recovery or any other keys for the next boot loop iteration" but when i pressed f4 not happen and also i pressed f2 nothing happen cannot go to bios setup.does anyone help me on this pleaseComment
-
Re: samsung np270e4e BIOS problem
Dear Romulo, Bios posted by me earlier will not work on your laptop as my dump is related to board id" Lotus Sv" whereas your original dump's board is is "Lampard CRV". Unfortunately i dont have that dump but perhaps this info may help others to help you with exact bios. You can cross check this info by opening your bios in HXD and searching for Hex Values 56 65 72Comment
-
Re: samsung np270e4e BIOS problem
hereAttached FilesComment
-
-
Re: samsung np270e4e BIOS problem
please help me sir i just flash my bios with clean me and this hapen
https://youtu.be/gSC0DjzAEXkComment
Related Topics
Collapse
-
by lucaszmn
Summary of BIOS Whitelist Removal Problem
Problem:
I am attempting to remove the WWAN card whitelist from my Lenovo ThinkPad T560.
Initial Findings:- My current BIOS version is N1KET58W (1.45).
- I have a CH341A programmer and have successfully created two full backups of my BIOS.
- I have the ability to use command-line tools on a Linux machine.
- I attempted to use several automated and manual patching methods on my N1KET58W (1.45) BIOS, including using hex strings. These attempts all failed.
- I concluded that the
-
Channel: BIOS Requests ONLY!
08-12-2025, 03:01 PM -
by KjellAfter installing Linux, I can no longer enter the BIOS of my Samsung Series 9 (NP900X3C) laptop. When pressing [F2] during boot I simply get a black screen. Same thing when pressing [F10] and choosing "Setup" from the "App Menu" tab. Apparently this is a relatively common issue with Samsung laptops of that generation, but unfortunately i haven't been able to resolve the issue (yet).
Things i've tried so far; reinstalled Windows 10, checked for redundant boot entries, tried to factory reset using the emergency keyhole, attempted to clear the NVRAM by physically...08-01-2025, 09:15 AM -
by AquaMan UaHello. I am asking you for a hint on how to solve the problem with my touchbook Panasonic CF53-2 standart model. After setting up the BIOS, the laptop displays the wrong image until Windows loads. (More precisely, it displays, but distorted, instead of the Panasonic image immediately after turning it on, it displays what is in photo #1 in the attached file) Then the image appears when Windows starts loading and then there are no problems with the screen until the reboot. If you enter the BIOS, just a black screen. If you connect an external screen, the image on it is the same as on the built-in...2 Photos
-
Channel: BIOS Requests ONLY!
-
-
by traxformaniaHello,
I'm using TONGFANG "GM7TG7P" model laptop for over 3 years and i'm entering the same bios administrator password everyday. My laptop has Aptio BIOS (American Megatrends, AMI).
But today it's not accepting my password. I'm %100 sure i'm entering the correct password.
I'm trying to reset my bios without success.
I tried :
-I removed the BIOS battery and main battery. Waited for a long time but it didn't work. They already stated in the user manual that the password will not be reset even if the batteries... -
by macabookHello everyone,
I’m currently working on a dead MSI GP75 Leopard (MS-17E71) motherboard (i7 CPU, NVIDIA GPU) with a no display/no backlight issue initially. After extensive investigation, I’m at a critical stage involving EC firmware, BIOS/ME region interaction, and possible deep corruption. I'm seeking advanced insight from anyone with experience in EC/BIOS sync issues or PCH-level behavior. Here’s a full breakdown:
🧩 Initial Issue- Board powers on (fans spin, keyboard lights up and can be adjusted, caps lock led lights), but no display or backlight
- External display (HDMI) shows
-
Channel: BIOS Requests ONLY!
07-24-2025, 02:17 PM - Loading...
- No more items.
Comment