convert a file .axe to Hex to load it in a pic 18f14k22

[saveriuccio]

Hello everyone
I would like to ask you if you can convert a file.axe to Hex to load it in a pic 18f14k22.
I'll explain better.
I uploaded a file with .axe extension via an axe027 usb cable on this pic. the cable broke me I only have the pickit2 programmer and it does not load the .axe only Hex format.
excuse me administrators I do not know if it was the right place to ask such a thing

[saveriuccio]

Re: convert a file .axe to Hex to load it in a pic 18f14k22

there is at least something to read the information. I attach the file

[stj]

Re: convert a file .axe to Hex to load it in a pic 18f14k22

i think the pickaxe has a bootloader that loads the axe file, so it could be encrypted or incomplete without that bootloader.
maybe Sonsivri knows more.
http://www.sonsivri.to/forum/index.php

[saveriuccio]

Re: convert a file .axe to Hex to load it in a pic 18f14k22

unfortunately the site does not register. thanks for the reply

[stj]

Re: convert a file .axe to Hex to load it in a pic 18f14k22

the AXE file is not pic code, if you look in a hex editor you see a header and then a block of code that i suspect is tokenised or encrypted.

[saveriuccio]

Re: convert a file .axe to Hex to load it in a pic 18f14k22

in fact I had imagined it. thanks to all

[stj]

Re: convert a file .axe to Hex to load it in a pic 18f14k22

why not fix the cable?

[saveriuccio]

Re: convert a file .axe to Hex to load it in a pic 18f14k22

yes. I took another one

unfortunately they are expensive

[stj]

Re: convert a file .axe to Hex to load it in a pic 18f14k22

it's a usb to serial board with an ftdi chip and a custom id number

i dont think it needs to be ftdi,
and a lot of usb 2 serial boards from china for like €2 can either be fixed to show a different id or just patch the id in the software to match a standard cable