VRM Mod cell phone app

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Retrorockit
    Senior Member
    • Feb 2020
    • 105
    • United States

    #1

    VRM Mod cell phone app

    I found this Vmod Calculator in Google Play.
    https://play.google.com/store/apps/d...hl=en_US&gl=US
    It's for spoofing the CPU Voltage feedback signal pin VSENSE at the VRM controller chip. This works for GPUs also.
    Input CPU mV
    Resistance to GRD at the VSENSE pin.
    This produces a chart of CPU mV using various pulldown potentiometers installed there. Unless you install a readout Volt gauge you will have to rely on the chart beause the computer will think everything is normal. This could be useful for Pinmod overclocking of locked CPUs. Like 3.83GHz E7600 @333fsb.
    If you click around thereare a couple sample charts for 1.200V, and 1.45V starting points.
  • nivirus2000
    Member
    • Apr 2017
    • 45
    • United States

    #2
    Re: VRM Mod cell phone app

    Awesome

    Comment

    • Retrorockit
      Senior Member
      • Feb 2020
      • 105
      • United States

      #3
      Re: VRM Mod cell phone app

      This also lets you sneak past Intels silly 1.6V. VSEL limit.

      Comment

      • Retrorockit
        Senior Member
        • Feb 2020
        • 105
        • United States

        #4
        Re: VRM Mod cell phone app

        Did I forget to mention E7600 @ 400fsb X 11.5 = 4.6GHz
        The E7500 would be 4.4GHz, and is known to go 333fsb x 11 = 3.67GHz on stock Voltage.
        You can use Throttlestop to tune the multiplier back down if needed.
        The Dell T3400 workstation has X38 chipset with 400fsb support (unofficial).
        Last edited by Retrorockit; 01-11-2022, 09:44 AM.

        Comment

        Related Topics

        Collapse

        • SluggerB
          Help with trying to fix phone that is not charging (Pics inside)
          by SluggerB
          I have two TCL A30 phones.

          Old Phone: This phone worked fine for years, then stopped charging If you plugged a charger into it, the phone would make the charging sound, the phone would tell you it is charging, but the battery icon would not have the charging symbol in it and the battery would not charge.I tried new battery, same behavior.

          New Phone: Works fine, bought as a donor board to try and repair Old Phone

          My interest here is to repair Old Phone, using components parts off New Phone if needed. I am not interested in replacing Old Phone with New Phone....
          08-12-2024, 08:11 AM
        • Document Archive
          Nokia 5510 Cell Phone Schematic
          by Document Archive
          Nokia 5510 Cell Phone Schematic...
          10-31-2024, 02:12 PM
        • Document Archive
          Nokia 2600 Cell Phone Schematic
          by Document Archive
          Nokia 2600 Cell Phone Schematic...
          10-31-2024, 02:10 PM
        • keeney123
          new OS on a Sonim XP5s phone
          by keeney123
          To you programmers out there I want to know if it is possible to put a new OS on the Sonim XP5s phone? I only need this phone to make calls, receive calls, have a list of contacts and be able to call voice mail.
          I bought this phone new Sep.2021 as an unlock phone from a third-party seller. The phone worked fine until Jan 2022. I then had intermittent problems with the sound setting resetting itself. One of the settings, outdoor, would go to silent all by itself. When in silent mode it does not indicate a call has come in. I missed very important phone calls. All the other setting in sound...
          05-13-2022, 07:19 PM
        • tmhobadcap
          Lithium ion cell voltage not going up after 3.8V
          by tmhobadcap
          I got a chromebook with battery problem. It was charging when plugged in. But the indicator just showed that the battery was below 10% no matter how long it was plugged in. I took the battery pack out. There are two cells in series. Each cell had a voltage of about 3.7V. I charged one of them with a lithium cell charger. I can see current going into the cell at about 500mA. After several hours, the voltage was just about 3.8V. I charged it again manually by connecting 4.2V to it from a power supply and set the maximum current to 500mA. I can see about 100mA going into the cell. But the voltage...
          02-03-2025, 01:30 PM
        • Loading...
        • No more items.
        Working...