best cheap/free scores 1.1
Collapse
This is a sticky topic.
X
X
-
<--- Badcaps.net Founder
Badcaps.net Services:
Motherboard Repair Services
----------------------------------------------
Badcaps.net Forum Members Folding Team
http://folding.stanford.edu/
Team : 49813
Join in!!
Team Stats -
Re: best cheap/free scores 1.1
Scored another laptop, a Gericom "Overdose" Mobile 36040c.
I have been regretting my life choices and will gladly take the next laptop that should arrive soon - an ASUS X75VD.
Guess I needed a reminder of how bad ECS/PCChips can be. SiS M661FX iGP, Celeron M 360 (replaced with a Pentium M 740), keyboard barely works as intended, 80GB Samsung IDE HDD. Stuck 2x1GB DDR sticks, they get recognized as half the total capacity.
I don't think I've had enough brains when buying this thing, and I'm not ashamed to admit it.
Hopefully the X75VD will at least be much easier to work on, and here's me keeping fingers crossed that the CPU is removable in that one. (since I've noticed there are two X75VD revisions. One has a normal mPGA989 socket, while the other has a soldered in i3 CPU. Both boards have 4GB Micron/Crucial RAM soldered onboard) i3 2nd gen + GT610M 1GB doesn't sound too bad, honestly.Main rig:
Gigabyte B75M-D3H
Core i5-3470 3.60GHz
Gigabyte Geforce GTX650 1GB GDDR5
16GB DDR3-1600
Samsung SH-224AB DVD-RW
FSP Bluestorm II 500W (recapped)
120GB ADATA + 2x Seagate Barracuda ES.2 ST31000340NS 1TB
Delux MG760 case
Comment
-
Re: best cheap/free scores 1.1
The X75VD came in. Soldered i3-2370M CPU @ 2.4GHz (can't have all the nice things in life, eh? Oh well, at least it ain't a Celeron.), a GT610M 1GB, no HDD caddy but had a 250GB Hitachi with 90% life (which I won't discard, but will replace it with a WD Blue WD7500BPVX).
I'm suspecting the charger that came with it is a knockoff and is the sole reason the seller sold it to me as "broken" - broken as in "runs for 1 hour then kills power". The charger it came with not only has a bright blue LED (which AFAIK ASUS almost never used, not even on the ROG chargers - I've had a 180W ROG charger and even that uses green) and on top of that, it's way more lightweight than the other ASUS charger I have (19v 4.74A), which seems to be of a older generation.
Currently installing Win10 LTSC as we speak and will hopefully install a SSD in place of the DVD-RW drive in the near future. (just for variety reasons, I might opt for a Kingston 480GB)Main rig:
Gigabyte B75M-D3H
Core i5-3470 3.60GHz
Gigabyte Geforce GTX650 1GB GDDR5
16GB DDR3-1600
Samsung SH-224AB DVD-RW
FSP Bluestorm II 500W (recapped)
120GB ADATA + 2x Seagate Barracuda ES.2 ST31000340NS 1TB
Delux MG760 case
Comment
-
Re: best cheap/free scores 1.1
Scored another cheapo machine:
random "Comprace" case made by Deer (one of those cheap specials where only one side of it is removable!!!)
Premier LC-C400ATX that will make for a decent 250W unit after a recap (it has most of the components installed and uses an actual rectifier for 12v!)
2x CD-RW/DVDROM drives, one LG one ASUS.
ASUS M2NPV-VM mobo
2x512MB DDR400
Tenda TEL8139D NIC PCI (likely the onboard NIC is kill, otherwise I don't see why would you run a 10/100 NIC when the MB offers Gigabit.)
what I think is a Sempron 3000+ or 3200+ (seriously, why do these even exist, and who thought these were useful for anything?)
Cleaned the case thoroughly and put it aside for the time being. Might complete it back together with a A64 x2 (at least) and a PCI-E GPU of the right era - I'm thinking a 7300GT should suffice? It will run Vista SP2 (wanted to build a Vista machine for quite some time and this would be a good candidate) and will have at least 2 or 2.5GB of RAM (though I think the chipset does support 4GB.)Main rig:
Gigabyte B75M-D3H
Core i5-3470 3.60GHz
Gigabyte Geforce GTX650 1GB GDDR5
16GB DDR3-1600
Samsung SH-224AB DVD-RW
FSP Bluestorm II 500W (recapped)
120GB ADATA + 2x Seagate Barracuda ES.2 ST31000340NS 1TB
Delux MG760 case
Comment
-
ASRock B550 PG Velocita
Ryzen 9 "Vermeer" 5900X
32 GB G.Skill RipJaws V F4-3200C16D-32GVR
Arc A770 16 GB
eVGA Supernova G3 750W
Western Digital Black SN850 1TB NVMe SSD
Alienware AW3423DWF OLED
"¡Me encanta "Me Encanta o Enlistarlo con Hilary Farr!" -Mà mismo
"There's nothing more unattractive than a chick smoking a cigarette" -Topcat
"Today's lesson in pissivity comes in the form of a ziplock baggie full of GPU extension brackets & hardware that for the last ~3 years have been on my bench, always in my way, getting moved around constantly....and yesterday I found myself in need of them....and the bastards are now nowhere to be found! Motherfracker!!" -Topcat
"did I see a chair fly? I think I did! Time for popcorn!" -ratdude747Comment
-
Re: best cheap/free scores 1.1
Scored two more mobos:
ASUS P5E-VM DO - Q35 chipset. Has a buttload of bulged KZGs, as well as TMVs around the CPU. I recall having some poly caps for the CPU socket so no biggie, and will probably go with either Panasonic caps or Nichicons for the rest of the mobo
ASUS M2NPV-MX - same as my M2NPV-VM, sans 1394, and crappier cap choice for 1000uf caps (VM has Panasonics, MX has TK)
The latter (M2NPV-MX) also came with a rather nice Titan cooler (these were pretty good, back in the Socket 462 days) and a Athlon 64 3500+.Last edited by Dan81; 01-03-2022, 08:59 AM.Main rig:
Gigabyte B75M-D3H
Core i5-3470 3.60GHz
Gigabyte Geforce GTX650 1GB GDDR5
16GB DDR3-1600
Samsung SH-224AB DVD-RW
FSP Bluestorm II 500W (recapped)
120GB ADATA + 2x Seagate Barracuda ES.2 ST31000340NS 1TB
Delux MG760 case
Comment
-
Re: best cheap/free scores 1.1
I saw some pictures of the VM DO with all poly VRM caps. But except a few the rest of them look like KZGCap Datasheet Depot: http://www.paullinebarger.net/DS/
^If you have datasheets not listed PM meComment
-
Re: best cheap/free scores 1.1
Mine has bulged 680uF 4v TMVs near the CPU socket, and KZGs everywhere else. Bulged of course, though the board does POST.Main rig:
Gigabyte B75M-D3H
Core i5-3470 3.60GHz
Gigabyte Geforce GTX650 1GB GDDR5
16GB DDR3-1600
Samsung SH-224AB DVD-RW
FSP Bluestorm II 500W (recapped)
120GB ADATA + 2x Seagate Barracuda ES.2 ST31000340NS 1TB
Delux MG760 case
Comment
-
Re: best cheap/free scores 1.1
I replace those with 560uF 4v SEPC polymers that are ~7mm tall. One thing you have to beware of is using caps taller than the originals, it can interfere with heatsinks.<--- Badcaps.net Founder
Badcaps.net Services:
Motherboard Repair Services
----------------------------------------------
Badcaps.net Forum Members Folding Team
http://folding.stanford.edu/
Team : 49813
Join in!!
Team StatsComment
-
Re: best cheap/free scores 1.1
Would 6.3v off a dud P5K work? I'm using a low profile HSF with a E2200 for now.Main rig:
Gigabyte B75M-D3H
Core i5-3470 3.60GHz
Gigabyte Geforce GTX650 1GB GDDR5
16GB DDR3-1600
Samsung SH-224AB DVD-RW
FSP Bluestorm II 500W (recapped)
120GB ADATA + 2x Seagate Barracuda ES.2 ST31000340NS 1TB
Delux MG760 case
Comment
-
<--- Badcaps.net Founder
Badcaps.net Services:
Motherboard Repair Services
----------------------------------------------
Badcaps.net Forum Members Folding Team
http://folding.stanford.edu/
Team : 49813
Join in!!
Team StatsComment
-
Re: best cheap/free scores 1.1
560uF 6.3v poly, there's no lytic on the P5K from what I can see on the board.Main rig:
Gigabyte B75M-D3H
Core i5-3470 3.60GHz
Gigabyte Geforce GTX650 1GB GDDR5
16GB DDR3-1600
Samsung SH-224AB DVD-RW
FSP Bluestorm II 500W (recapped)
120GB ADATA + 2x Seagate Barracuda ES.2 ST31000340NS 1TB
Delux MG760 case
Comment
-
<--- Badcaps.net Founder
Badcaps.net Services:
Motherboard Repair Services
----------------------------------------------
Badcaps.net Forum Members Folding Team
http://folding.stanford.edu/
Team : 49813
Join in!!
Team StatsComment
-
Re: best cheap/free scores 1.1
Well, thanks for the tip.
Just polymerised the whole CPU VRM section and got rid of those rotten TMVs, with Fujitsu taking their place. 9x 560uF 6.3v, able to withstand even a Kentsfield Q6600.
The entirety of KZGs that were on the board were eradicated. I didn't take any risks in leaving ANY of them - I've previously had a MSI P965 Platinum - I initially recapped it to replace a few blown KZGs near the main PCI-E slot near the northbridge. Three months after, half of the board had blown KZGs from just sitting. Polymodded it entirely and gave it away to a friend.
Onto this P5E-VM DO, I replaced the 820uF 6.3v (seriously ASUS, why are you like this? Would 1000uF have hurt you that much?) KZGs with Panasonic FJ and FJS of the same rating, off two dead motherboards - a P5GC-MX/1333 and a M2N-MX. Not the best way to do it but all of them seem in pretty good shape.
What absolutely surprised me is the fact it supports TPM and even has a Intel ME BIOS loading on boot. Apparently "Digital Office" is something ASUS must've yet again took way too far.
Will make a pretty rad "wolf in sheep's clothing" machine, with a Q9400, 4 or 8GB of RAM, a 500GB Seagate + 2x 74GB Raptors in RAID, a HD4850 512M, SATA LG DVD-RW, and most of all, the most random and generic black micro/miniATX case you can ever think of. Gotta check what PSU I have that can run the 4850, though I remember pimping out an Allied unit to ridiculous levels just to run that 4850, so why not put it up to work?Main rig:
Gigabyte B75M-D3H
Core i5-3470 3.60GHz
Gigabyte Geforce GTX650 1GB GDDR5
16GB DDR3-1600
Samsung SH-224AB DVD-RW
FSP Bluestorm II 500W (recapped)
120GB ADATA + 2x Seagate Barracuda ES.2 ST31000340NS 1TB
Delux MG760 case
Comment
-
Main rig:
Gigabyte B75M-D3H
Core i5-3470 3.60GHz
Gigabyte Geforce GTX650 1GB GDDR5
16GB DDR3-1600
Samsung SH-224AB DVD-RW
FSP Bluestorm II 500W (recapped)
120GB ADATA + 2x Seagate Barracuda ES.2 ST31000340NS 1TB
Delux MG760 case
Comment
-
Re: best cheap/free scores 1.1
IMO unless you're doing it because you're bored or want to keep your skill up (which you obviously don't need to do). Isn't this a waste of money? I mean, those boards don't sell for much usedCap Datasheet Depot: http://www.paullinebarger.net/DS/
^If you have datasheets not listed PM meComment
-
Cap Datasheet Depot: http://www.paullinebarger.net/DS/
^If you have datasheets not listed PM meComment
-
Re: best cheap/free scores 1.1
Considering I got all of them for free (the fellow who I got the P5E-VM DO from was cleaning up his workplace and chose to keep only 1155 and newer boards), not at all.Main rig:
Gigabyte B75M-D3H
Core i5-3470 3.60GHz
Gigabyte Geforce GTX650 1GB GDDR5
16GB DDR3-1600
Samsung SH-224AB DVD-RW
FSP Bluestorm II 500W (recapped)
120GB ADATA + 2x Seagate Barracuda ES.2 ST31000340NS 1TB
Delux MG760 case
Comment
-
Re: best cheap/free scores 1.1
Just because something is free does not mean it's worth much
on ebay the board sells for ~40, and I'm sure shipping from Romana is a bitch
Unless you rebuild for others I don't see any point of redoing it and setting it aside
FYI your state and country are reversedCap Datasheet Depot: http://www.paullinebarger.net/DS/
^If you have datasheets not listed PM meComment
-
Re: best cheap/free scores 1.1
Since your games won't play on that v5500, best toss it in the trash....it's no good by that logic.<--- Badcaps.net Founder
Badcaps.net Services:
Motherboard Repair Services
----------------------------------------------
Badcaps.net Forum Members Folding Team
http://folding.stanford.edu/
Team : 49813
Join in!!
Team StatsComment
Related Topics
Collapse
-
by Dan81Just as the title states. Two cheap SiS machines, surprisingly stable.
What I will tackle in the near future (the build will be slightly postponed due to slight stomach issues - am still recovering and my physical power (sorry if it sounds weird,English isn't quite my primary language) isn't the best at the moment. Especially with the diet I have to take at the moment.) are two SiS based machines.
The first one is a IPC rebranded Mitac 7521T. Why did I feel the need to tackle this machine? Well, just look at the specs:
CPU - P3 1100MHz Coppermine...-
Channel: General Computer & Tech Discussion
-
-
by eccerr0r"Caseless Cheap Chinese electronic tools" I mean things you get from banggood, ali, fleabay, Am-Zon, etc. like AVR-Transistortester, miscellaneous signal generators, frequency counters, (variable) power supplies, oscilloscopes, low resistance meters, etc., etc. that comes optionally with a case, or comes only with a cheap piece of plastic that barely provides protection to the PCB.
Just wondering what of these (generally flimsy) tools you actually find use (almost) everyday and find indispensable for the price, compared to buying a Fluke or whatnot, if there is an expensive... -
by eccerr0rWhat's the cheapest thermal paste people get that's consistently "decent" ... I'm wondering if I should switch from zinc oxide to something else, but don't want to be disappointed.
Again needs to be cheap... ideally something as cheap as zinc oxide but I figure if it's claimed "better" then it means "more expensive"... which would add to the disappointment. -
by GorflanHi all, First post here
Decided to up my game in electronics repair, and bought this dead notebook as learning material. The guy had already sold the screen assembly and ssd, I got the rest very cheap. Told me that he left it charging, and a power surge killed the non original USB C charger in use, and the note.
Schematics seem to be non existent, only sites I`ve found with reference to this model are just trying to serve me malware.
Been probing arround to reverse engineer the board, and made some progress:
- USB PD controller chip (TI TPS65994... -
by GjacksonHi all, I have a cheap LCD with a cheapo brand name "MASTER", it's one of those sets with a single PCB (Motherboard model: tp.s506.pb801) that handles everything. It powers up fine but shows signs that usually indicate a TCON problem (see images) however there is no TCON to troubleshoot, where should I start troubleshooting, on the mainboard? or the LCD's PCB? I tried tapping the thin LCD PCB while it was running and only got a change in video when I tapped a certain IC on the board (see picture below, IC circled in red) and the screen went dark and came back but now it was white instead...
- Loading...
- No more items.
Comment