V5-573G upgrade from WXGA screen to WUXGA

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • RethoricalCheese
    Badcaps Legend
    • Mar 2013
    • 1517
    • Estonia
    #1

    V5-573G upgrade from WXGA screen to WUXGA

    So, I've got this laptop with a cracked screen and would like to order a new screen. Was thinking about upgrading it while I am at it.

    There are already FullHD versions of this laptop so I know it's possible.
    My question is, do I need to change the cable too or the current cable works with FullHD panel aswell?

    This laptop uses eDP, not LVDS.
    Tags: None
    • cpt.charlie
      Badcaps Veteran
      • Sep 2013
      • 270
      • Spain
      #2
      Re: V5-573G upgrade from WXGA screen to WUXGA

      i guess it should work, however i don't know if the LCD pinout is the same for all manufacturers, have a look to the datasheet first.

        Comment

        • RethoricalCheese
          Badcaps Legend
          • Mar 2013
          • 1517
          • Estonia
          #3
          Re: V5-573G upgrade from WXGA screen to WUXGA

          eDP seems to have a standardized pinout, unlike LVDS.

          Did some further research. Didn't find a 100% sure answer about my particular laptop nor its cable but similar Acer products didn't need cable replacement when upgrading.

          So I think I will just order a new 15.6" eDP FullHD Matte IPS panel later.

            Comment

            • RethoricalCheese
              Badcaps Legend
              • Mar 2013
              • 1517
              • Estonia
              #4
              Re: V5-573G upgrade from WXGA screen to WUXGA

              Got the new screen. Works perfectly without changing cable.

                Comment

                • rioreno
                  Badcaps Veteran
                  • Feb 2009
                  • 540
                  • Indonesia
                  #5
                  Re: V5-573G upgrade from WXGA screen to WUXGA

                  Originally posted by The_Boss
                  Got the new screen. Works perfectly without changing cable.
                  nice... would you post your led type/brand before and after you changing??
                  thanks

                    Comment

                    • RethoricalCheese
                      Badcaps Legend
                      • Mar 2013
                      • 1517
                      • Estonia
                      #6
                      Re: V5-573G upgrade from WXGA screen to WUXGA

                      Original HD screen was N156BGE-EA1 rev. C1

                      And well, I did not check what was actually written on the back of the FullHD screen but invoice says it's B156HAN01.2 (and it probably is)

                        Comment

                        • rioreno
                          Badcaps Veteran
                          • Feb 2009
                          • 540
                          • Indonesia
                          #7
                          Re: V5-573G upgrade from WXGA screen to WUXGA

                          Originally posted by The_Boss
                          Original HD screen was N156BGE-EA1 rev. C1

                          And well, I did not check what was actually written on the back of the FullHD screen but invoice says it's B156HAN01.2 (and it probably is)
                          thanks for the information...

                            Comment

                            Previous template Next

                            Related Topics

                            Collapse
                            • Ryan.man
                              Macbook 2017 with touchbar (A1706) won't turn on after removing the screen
                              by Ryan.man
                              Hello everybody! Posting this in hopes somebody has some expertise that leads to a clear path of troubleshooting that saves me a lot of time!

                              My macbook has the flex cable problem, the one that prevents the screen turning on. Ive been dealing with this for the last 3 years. Last year it went dead and I managed to fix it following youtube tutorials. But my fix wasnt the best, the problem returned a month later. This week, it went dead again. I again tried to fix it.

                              This time the original cable broke too close to the screen, it can't be fixed without tearing the screen...
                              02-04-2025, 12:23 PM
                            • smic717394
                              iphone XS turns off when press on screen.
                              by smic717394
                              Hi,

                              I have a iphone XS that came in for a screen replacement, the screen was badly cracked, and inside missing scues, on the back of the screen still the blue protector, the screen was a LCD. So we replaced the screen and all good, installed the screen and we noticed that pressing the screen with a bit of force but not excessive, the phone dies. After plugging the charger it turns back on, but again if you press it it dies. I open the phone again, and I can't see anything major, with the phone open, if I press on the logic board, battery, charging board, or even putting pressure on...
                              07-25-2024, 10:16 AM
                            • Chrissygizmo
                              Samsung UE55JU6800K half screen dark
                              by Chrissygizmo
                              Hello everyone, I’ve just been given a Samsung UE55JU6800K smart tv as it had white spots on the screen due to the led lenses falling off. After refitting them & putting the tv back together I thought it was a nice easy fix for a free bedroom tv , then I tried it before screwing the back into place. I realised that the right side of the screen was darker than the other side, I removed the screen again as I thought the backlights had failed but they are fine.
                              I put the screen back in place & turned it back on . The screen seemed to be ok again but different screens on the same...
                              02-10-2025, 12:33 AM
                            • spice_disc
                              Vizio TV M50-C1 reboot cycle and static on screen
                              by spice_disc
                              I'm currently trying to diagnose and fix my Vizio TV (Model M50-C1). I've tried a number of different basic solutions, but I'm trying to determine if my issue is currently a failing panel, T-Con board, or main board (or something else entirely) and whether or not it is worth my time to fix it. Details of the issue and what I've tried are below as well as why I think it is either a bad panel, T-Con board, or main board.

                              The Issue: The TV will be on and working fine but after the TV is on for ~5-10 minutes the screen will freeze (with sound continuing) until the TV reboots itself. While...
                              1 Photo
                              09-08-2024, 02:37 PM
                            • ipatch
                              ipad pro 9.7" blew a SMD component while replacing the screen 🤦‍♂️
                              by ipatch
                              i have an ipad pro 9.7" (1st gen) A1674 where i replaced the screen, but never attached the screen to the frame/chassis (glued down) due to the ipad being previously dropped so the new screen would never fit in the frame properly. so i need flex/bend the chassis to eventually fix the new screen in properly. so i temporarily just applied blue tape around the edges of the screen to keep it in place. when watching videos with the ipad the screen started flicker, so i though maybe the new quasi cheap amz screen i purchased was going out. so i disconnected then reconnected with power still on,...
                              08-24-2024, 02:36 PM
                            • Loading...
                            • No more items.
                            Working...