Sun Netra T headless install??

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Spacedye69
    Badcaps Veteran
    • Nov 2005
    • 698
    • US

    #1

    Sun Netra T headless install??

    Anyone have any experience with Sun hardware? I'm looking to install Open Solaris or Linux on my Netra T, but have never installed via serial on Sun hardware. Sun docs are geared to official install software, which I don't have or desire to get.

    Any tips would be great.

Related Topics

Collapse

  • japlytic
    DRIVER_PNP_WATCHDOG error re. old drivers in Windows 11 install image
    by japlytic
    In a Beelink GTR mini PC, mine has an Intel AX200NGW WLAN module.

    Tried (only with keyboard/mouse connected):
    • BIOS + database update
    • Using latest Windows 11 image built with official image creation tool
    • Previous setup version for Windows 11 installer
    • Replacing SSD without a slow block (the previous SSD had a slow block with access time > 500 mS)
    • TPM reset (worked to the point where DRIVER_PNP_WATCHDOG error message is displayed briefly after the point of stalling)
    • Disabling power to WLAN and LAN modules in BIOS (Advanced > AMD PBS > PCI Express Configuration)
    ...
    06-19-2025, 04:59 PM
  • 24gsm
    MacBook Pro A1708 install macos fail
    by 24gsm
    hi to all
    i have MacBook Pro (13-inch, 2017, Two Thunderbolt 3 ports)
    after enter to recovery and format hdd 1to .
    after try to install macos online . its frezz at loading install in boot and i waiting few hour but nothing i ty install by boot using flash disk but same issu

    can help please
    MacBook Pro (13-inch, 2017, Two Thunderbolt 3 ports)
    Serial Number: FVFXP0U0HV2J
    Config Code: HV2J
    Find My Mac: OFF
    ​...
    04-16-2025, 03:57 AM
  • duwane
    A2141 (2019 16" MB Pro) Strange macOS install issues. NAND? WIFI? FIRMWARE?
    by duwane
    Hi All.

    Sorry ahead of time for the text wall. This is a strange problem and I have tried to explain it as best I can. I realise this is a hardware forum (mostly), but I am still not sure if this is even a hardware fault! I am hoping that someone more knowledgeable than me in the area of understanding installation logs, or someone that has had a similar issue in the past may have some ideas of what might be causing this.

    The issue:
    Unable to do a clean install of any macOS versions supported for this model, even after fully erasing and formatting the internal SSD,...
    10-26-2022, 07:02 AM
  • howardc64
    A1312 (27” iMac 2009-2011) A1407 (Thunderbolt Display) A1316 (Cinema Display) Display Black Screen Repair
    by howardc64
    Problem

    This is an LG edge LED lit LCD Display. The LEDs are on the bottom edge of the display. There are 2 bars (left and right) Each bar has many LEDs and a 6 pin connector. Each pin drive several LEDs thus is the highest current flow / heat junction. The weak lead free solder gradually fails with thermal expansion/contraction cycling and increases resistance. PSU will compensate up to a point, then when the current is too high, PSU just shut down the backlight causing a dark display. I have even seen one which the connector just fell off as solder points became completely detached....
    08-04-2024, 10:36 PM
  • TrumanHW
    MacOS: R|W Programmers like CH341x BINs..?
    by TrumanHW
    For years I tried figuring out how to R|W BINs from my CH341x programmer.
    From FTDI's pkg, Apps specifically claiming they work, I failed for ~8 years.

    I'd expect many here figured it out (easily), but in case not ...
    It's one of the few forms of "how-to" remuneration I can GIVE BACK.

    This group is both GENEROUS & literally BRILLIANT / GENIUS!!!


    This may be the easiest means to copy-paste:

    Code:
    SERIAL -to- USB - CH341 ROM (MacOS):
    
    
    Install xcode:				xcode-select --install
    Relocate
    ...
    04-08-2022, 02:33 PM
  • Loading...
  • No more items.
Working...