WinFast K7nCR18G PROII

[Big Pope]

http://www.leadtek.com.tw/eng/mainbo...3&pronameid=78

This board is nFroce 2 SSP + MCP-T, it support 200MHz ~ 333MHz officially. Is there any mod BIOS can support 400MHz FSB? Like EPOX 8RDA series. Anybody knows? Thanks.

[gg1978]

Re: WinFast K7nCR18G PROII

Original Nforce 2 only supported up to 166FSB (333DDR) officially.. You need a Nforce 2 Ultra Northbridge to run "officially" at 200Mhz (400MhzDDR) FSB.. Most Epox 8RDA+'s start having trouble at around 180FSB, (360DDR) so it's a legit limitation of the original Nforce 2 chipset..

[tazwegion]

Re: WinFast K7nCR18G PROII

I've heard of similar limitations on FIC AU31's (also an Nforce2 IGP motherboard), they freeze & lockup above 333Mhz though some have been successfully OC'ed to 400Mhz, luck of the draw somewhat I suppose

I'm curious, are you attempting to run a higher fsb with the onboard graphics, or an add on AGP card?

[Big Pope]

Re: WinFast K7nCR18G PROII

I've heard of similar limitations on FIC AU31's (also an Nforce2 IGP motherboard), they freeze & lockup above 333Mhz though some have been successfully OC'ed to 400Mhz, luck of the draw somewhat I suppose

I'm curious, are you attempting to run a higher fsb with the onboard graphics, or an add on AGP card?

Problem is solved. Thanks all.

I have tried with a AGP display card, it can overclocked to 400MHz FSB. If i used with on board display, the maximum is 350MHz FSB.

[MD Willington]

Re: WinFast K7nCR18G PROII

At Nvidia's website there is a 23mb PDF that details the 166/200 limitation of the IGP chipset.