Epox EP 8K3A+/8K3A - need specs of 2 caps in DDR1 VRM arena

kotel studios

Senior Member

Join Date: Dec 2024

Posts: 133

Country: Poland
#1

Epox EP 8K3A+/8K3A - need specs of 2 caps in DDR1 VRM arena

01-18-2025, 08:54 AM

Hi,

Is there anybody here who could tell me what are the two caps marked bellow? Or atleast send me a picture of those two caps from their board. Size wise I think those will be 2200uF10v, the same as in the CPU VRM, but not sure.
Attached Files
Tags: None
kotel studios

Senior Member

Join Date: Dec 2024

Posts: 133

Country: Poland
#2

01-19-2025, 12:09 PM

Anybody?
Comment
rogfanther

Badcaps Veteran

Join Date: Jul 2006

Posts: 458

Country: Brazil
#3

01-20-2025, 01:46 PM

Don´t you have the board at hand ?

I would place a bet on 1000 x 6.3V.
Comment

Previous template Next

Epox EP 85 MVP3C-M - 3.54v Vcore regardless of jumpers

by kotel studios

Hi,

Recently I got an Epox EP-85 MVP3C-M board from scrap. After fixing the broken caps I powered it on without CPU and the jumpers set to 60Mhz FSB and 2x multiplier.
Sadly, Vcc3 was stuck at 3.54v regardless of jumpers. Vcc2 (Vi/o I think) was also the same voltage.
So, I've returned to the original configuration I got the board in - 100Mhz FSB and 4x multiplier. Voltages haven't changed at all.
What I've tried so far:
replace the original N-MOSFETs with beefier 60V ones for testing
Resolder the resistors near the Vcore Jumper block
Short Vcore...
- Channel: Troubleshooting Desktop Motherboards, Graphics Cards, and PC Peripherals
05-25-2025, 01:46 AM
How to read inductor specs?

by badcap111

I have a broken samsung galaxy s10 with missing inductor. I want to replace the missing inductor and I have found some vendors. But I don't understand how to read the specifications of the inductor. The specs are:

INDUCTOR-SMD;470NH,20%,2520,T0.8,0.029OH

I understand that the inductor is 470 nH with 20% margin, and the size is 2520 or 1008 (imperial measure), but what do T0.8,0.0290OH mean? I can't find any explanation on the web.
- Channel: General Electronics Technical Discussion
09-12-2023, 01:25 PM
Unknown diode specs V6 18

by badcappo

Hi there, looking for a compatible replacement for a diode type labelled "V6 18" from a dead Panasonic plasma TV power source. Possibly a V6 600 volts diode as seen here: https://electronics.stackexchange.co...nt-diode-v6-88 ?
Thank you ...
- Channel: Troubleshooting TVs and Video Sources
03-09-2025, 07:13 AM
Need to get specs for this electrolytic cap please

by lightbeing

Hi,
I would be very grateful if the make of this 100uf 35V smd cap in the photo can be identified. It is used in dc-dc converter on a 15 years instrument board that is fairly used. I would ideally like to find its specs in order to replace it with a similar one, that has similar ripple current, ESR, etc.
Thank you!...
- Channel: General Capacitor Questions & Issues
11-15-2022, 06:22 PM
Looking for fuse specs HRC , Fuse Link, Type A350/5

by Tioleco

Hello
Can´t find datasheet with specs of this fuse , International Rectifier , High Speed , HRC , Fuse Link, Type A350/5.
Thank you....
- Channel: General Electronics Technical Discussion
06-11-2022, 11:29 AM
Loading...
No more items.

Epox EP 8K3A+/8K3A - need specs of 2 caps in DDR1 VRM arena

Epox EP 8K3A+/8K3A - need specs of 2 caps in DDR1 VRM arena

Comment

Comment

Related Topics