CRT Frequncies

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • VILE DISRUPTION
    Member
    • Jun 2006
    • 47
    #1

    CRT Frequncies

    I was just wondering about my crt's menu display. it has 2 frequncies:
    FH:in KHz
    FV:in Hz

    FV would obviosly be the refresh rate because it has 85Hz but what would the FH be(currently 69KHz)?

    Stats Reset Every Month.
    My Forums
    Tags: None
    • Per Hansson
      Super Moderator
      • Jul 2005
      • 5895
      • Sweden
      #2
      Re: CRT Frequncies

      Horizontal vs Vertical frequency
      "The one who says it cannot be done should never interrupt the one who is doing it."

        Comment

        Previous template Next

        Related Topics

        Collapse
        • rattlesnake
          Samsung SyncMaster 955DF dim image fix
          by rattlesnake
          This display looks a bit dim but the image is otherwise fine. I already set the contrast to 100 and the brightness to 50 (more than that is counterproductive, it becomes hazy).

          To enable extra tuning, I have to enable the "Highlight Zone" function and stretch it to full screen. That way it looks really bright/intense and really good! I wish I could set it permanently like this, but as soon as you change the display mode/resolution or you turn the monitor off, you lose the "Highlight zone" config and you have to manuallly activate it again. Also, the manual says...
          08-12-2023, 07:03 PM
        • Document Archive
          HP Compaq dc7700p Intel Core2 Duo Processor E6300 2x512M/80G DVD-ROM WXP Pro Small Form Factor PC E6300 Specification for Upgrade or Repair
          by Document Archive
          This specification for the HP Compaq dc7700p Intel Core2 Duo Processor E6300 2x512M/80G DVD-ROM WXP Pro Small Form Factor PC can be useful for upgrading or repairing a desktop PC that is not working. As a community we are working through our specifications to add valuable data like the Compaq dc7700p Intel Core2 Duo Processor E6300 2x512M/80G DVD-ROM WXP Pro Small Form Factor PC boardview and Compaq dc7700p Intel Core2 Duo Processor E6300 2x512M/80G DVD-ROM WXP Pro Small Form Factor PC schematic. Our users have donated over 1 million documents which are being added to the site. This page will...
          09-12-2024, 03:36 PM
        • trepachka
          Vostro 3510 LA-L246p missing 3.3V and 5V
          by trepachka
          This laptop (LA-L246p) came in with liquid damage in multiple spots. I had the board thorously cleaned. I found a shorted cap and a blown fuse in one location and now the laptop is charging. However, I am not getting 5V and 3.3V rails.

          This board is almost identical to LA-L243p or LA-L241p.

          PU501 (SY8288CRAC 5V converter) is getting ENLDO_3V5V (around 4.5V) on pin 11 but EN_5V (0V) on pin 12.

          Similarly,

          PU301 (SY8386BRHC 3.3V converter) is getting ENLDO_3V5V (around 4.5V) on pin 8 but EN_3V (0V) on pin 9

          So, obviosly the enable signal...
          10-01-2023, 10:55 PM
        • skynetto
          MSI Z590 MS-7D07 rev 2.1 EC Firmware
          by skynetto
          Hello there.
          I have this mainboard (MSI Z590 Gaming edge - MS-7D07 rev 2.1) with these symptoms.
          1. SIO_3VA ON
          2. ATX_5VSB ON
          3. 3VDSW ON
          4. Mainboard stucked in Deep_S5 state

          Problem:
          RSMRST Incative. (Obviosly everything dead)


          Tried just for fun to update the BIOS with its Bios flashback function (Push button and USB stick with bios in it).
          Main Bios restored succesfully.
          When updating Bios all the voltages comes on except PCH which is not needed.

          EC Controller: NCT6687D-M
          External SIO Firmware...
          03-17-2023, 10:30 AM
        • jrodefeld
          Sony GDM-FW900: Help me diagnose why it won't turn on? (Video included)
          by jrodefeld
          Hi everyone,

          I have a vintage Sony GDM-FW900 crt monitor that I really enjoy using, but it has developed a problem and won't start up.

          This unit was completely serviced a few years ago by Unkle Vito in Los Angeles and it fully passed all tests, was factory calibrated, etc. There was a faulty part (can't remember exactly which one) that was replaced at another repair shop about a year ago. Other than that, it's been working great.

          I just say all that to say that this unit is probably in pretty good shape since it's been fully serviced and checked recently....
          03-03-2023, 09:51 PM
        • Loading...
        • No more items.
        Working...