Re: Why this UPS is using 1200V IGBTs ?
I hope that some one from moderation staff can solve this PM lock out issue.
-
-
-
Re: Why this UPS is using 1200V IGBTs ?
Ok sam ive sent you a message on your email.
My adress starts with ibnou......
You can delete your email adress from this thread.Last edited by SistMaticZ; 10-15-2019, 01:12 PM.Leave a comment:
-
Re: Why this UPS is using 1200V IGBTs ?
DOnt worry about that . Thanks sam.Last edited by SistMaticZ; 10-15-2019, 01:10 PM.Leave a comment:
-
Re: Why this UPS is using 1200V IGBTs ?
You can send me a message at this email
---DELETED---
I do not normally check this email account very often
So please do not send a bunch of junk email I will just close this email account and get a different one
ThanksLast edited by Per Hansson; 10-21-2019, 05:14 AM.Leave a comment:
-
-
-
Re: Why this UPS is using 1200V IGBTs ?
User CP / FAQ / Community / Calendar / New Posts / Search / Quick Links / Log Out
Look at top left hand corner of this page and you will find ( User CP ) in the top left corner then click on it
Then another screen will pop up
Scroll down to edit options
Then scroll down to enable private message and select it then you should be able to send private messages
I hope this helpsLast edited by sam_sam_sam; 10-15-2019, 09:41 AM.Leave a comment:
-
Re: Why this UPS is using 1200V IGBTs ?
Then send a message to Top Cap about this problem
I just sent a private message to Top Cat that you can not send private messageLast edited by sam_sam_sam; 10-15-2019, 09:09 AM.Leave a comment:
-
-
Re: Why this UPS is using 1200V IGBTs ?
All you have to do is respond to the PM that I send to you and I should get it
It should have a reply button in the bottom right hand corner just hit the button and type in your reply
Or
Click on person name and Select public profile and select message then you should see a window pop up where you can type your messageLast edited by sam_sam_sam; 10-15-2019, 08:54 AM.Leave a comment:
-
Re: Why this UPS is using 1200V IGBTs ?
I dont have that option unfortunatly. maybe i should add him to my contacts.?Last edited by SistMaticZ; 10-15-2019, 07:09 AM.Leave a comment:
-
-
Re: Why this UPS is using 1200V IGBTs ?
i dont know how to write a pm to you thats the problem. I have read your pm.Leave a comment:
-
Re: Why this UPS is using 1200V IGBTs ?
I send you a PM
Look at the top right hand side of page you will private message just click on itLast edited by sam_sam_sam; 10-14-2019, 02:29 PM.Leave a comment:
-
Re: Why this UPS is using 1200V IGBTs ?
btw how can i Pm you Sam ?Leave a comment:
-
Re: Why this UPS is using 1200V IGBTs ?
^^ exactly this.
Last edited by SistMaticZ; 10-13-2019, 05:43 PM.Leave a comment:
-
Hi,
I'm having problems with my plasma Panasonic p42txu32e. The issue started about 12 months ago.
I have a remote controlled main outlet so whenever I turn off the TV set at night, I also switch off the whole power outlet.
It gives me a better feeling to know I don't have 230V on any cables, so my dog can't get hurt if he gets the idea to start chewing on something.
About 12 months ago the TV started to have the following problem: when pressing anything on the RC to get it on, the red led would go off.
Sometimes it would turn... -
Hello, the problem with this TV is it has all the Y and X voltages, but does not produce any image.
It had a TON of cracked solder joints on these boards, fixed all that I could find, but in the last test I forgot to plug in the Y-SUS to control board flat cable, it was left dangling and possibly some pins shorted to the panel metal ground, the X-Main buzzed quietly then blew up in 3 seconds after powering up, annoying.
Two RJH30E2 shorted, they are 360V 35A 1.7VCE IGBTs, the problem is I don't have any 360V IGBTs, only 300V or 600V, would two RJP3065 fit in? It's... -
Hi all,
I had a logitech Z506 psu go bad due some glue corroding the legs of several components and the one i'm struggling to find a replacement for is a green polyester capacitor markings 392J 1200V.
The problem is I can't find any 3.9nF caps with a voltage rating of 1200V from any reputable retailers (plenty of 100V) , this particular cap only seems to be available from Chinese sellers which leads me to believe the rating is garbage or the cap is.
There is a thread on this particular PSU here
https://www.badcaps.net/forum/showthread.php?t... -
Hello Community,
I recently tried to change the Batterie on my Omen by HP Laptop 17 an104ng and after putting in the new batterie ([Batterie Link](https://www.amazon.de/7xinbox-17-AN0...&keywords=16%2... -
Hello all, I have a mastervolt charger inverter I'm trying to repair, as I have no schematics I decided to trace our some of the parts to figure out the general operation.
I managed to trace our a rough block diagram of the power stage, and I'm quite interested in the operation.
Here are my questions.
I noticed there seems to be no dedicated charging section in the circuit. After some googling I assume this is what they called a bidirectional power design. Would like to know if my assumption of the operation are right.
Given that there are no diodes. I am assuming...
Leave a comment: