Will these work are good replacements for backordered items?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • OberAgain
    Member
    • Nov 2014
    • 25
    • USA

    #1

    Will these work are good replacements for backordered items?

    This is the backorder:
    https://www.digikey.com/product-deta...mSeq=279516639


    Here are the possible replacements - I was not sure about the ripple current and impedance being different so making sure they will work... this is for a
    Samsung 245BW Monitor

    I assume this would be the good replacement - was listed as a Substitute by Digi-Key but was not sure if that meant in every way (obviously some differences but dont know enough to know if they are differences I can work with)
    https://www.digikey.com/product-deta...mSeq=279518969

    Then I searched out this product - what looked like the Panasonic version of the product
    https://www.digikey.com/product-deta...mSeq=279519113

    Would either of them work as a good substitute? any one work best? or another item that might be even better?

    Thank you so much! You have all helped me save so much over the years, fixing my triple monitor setup over and over - you are all awesome!

    Thanks,
    -Patrick
  • stj
    Great Sage 齊天大聖
    • Dec 2009
    • 31015
    • Albion

    #2
    Re: Will these work are good replacements for backordered items?

    the panasonic FR is by far the best.
    the rubycon YXF is not even in the same class.

    Comment

    • OberAgain
      Member
      • Nov 2014
      • 25
      • USA

      #3
      Re: Will these work are good replacements for backordered items?

      Thank you much, greatly appreciated! Up to 4 Samsung 245bw repairs so far thanks to this forum, specifically Selldoor's excellent help on my first attempt. Loving this monitor and cant find any I would rather replace it with so I am very grateful to be able to repair it!
      -Patrick

      Comment

      Related Topics

      Collapse

      • hollox123
        ASUS ROG Strix G713QR - Keyboard, backlight and side LEDs don't work
        by hollox123
        Hello, I have an "ASUS ROG Strix G713QR" laptop, and for approx. 3 months I have the following problems:

        1. Laptop keyboard doesn't work
        2. The backlight on the laptop keyboard doesn't work
        3. The x2 side LEDs (red) on the laptop don't work

        The power button works, the touchpad works, and all the USB, HDMI, Ethernet, etc. ports work.

        I already tried to reinstall all the drivers and reinstall Windows. So I don't know what to try anymore that is software-related.

        But I am strongly aiming that it is somehow a BIOS-related problem,...
        05-11-2025, 08:05 AM
      • melvinvdb
        Lenovo y520-15ikbm most of the time doesn't turn on
        by melvinvdb
        Hello,

        I've repaired a few laptops in my life but this time my own laptop died😂.
        Funny enough this one is a bit tough on me.
        It doesn't turn on (most of the time).
        Model: Lenovo y520-15ikbm (NM-391).

        The only way to make it turn on is:
        1) unplug battery + charger + rtc (seems irrelevant)
        2) wait a minute
        3) plug battery/charger in
        4) on charger plugin, laptop turns on by itself. On battery plugin you have to press power button. Sometimes nothing happens and you have to try again.
        5) when it turns on it also displays POST...
        08-15-2024, 12:28 PM
      • irepair559
        Ps4 1215a hdmi diode readings good everything good but no pic??
        by irepair559
        PS4 1215A HDMI DIODE READINGS GOOD EVERYTHING GOOD BUT NO PIC? everything is good! what else can it be? if hdmi diode values are good that means encoder and filters are good right? idk what else it can be guys...
        01-05-2023, 12:32 AM
      • ResoluteHawk
        Lenovo Legion S7 15ACH6 Not Posting
        by ResoluteHawk
        I have a customer that brought in a Lenovo Legion S7 15ACH6. The problem is that the laptop is not posting.

        My first thought was to take out the DRAM and put it back in.
        No POST.

        Then I swapped the dedicated RAM with good known working RAM.
        No change.

        I then measured to see if 1.2V was being generated for the memory to turn on, so I measured PL600 which is where the output of the 1.2V rail is.
        Resistance was good; measuring ~40Ohms with the slotted RAM in.

        I took the slotted memory out and measured again.
        Resistance with...
        12-02-2024, 10:17 AM
      • howardc64
        A1312 (27” iMac 2009-2011) A1407 (Thunderbolt Display) A1316 (Cinema Display) Display Black Screen Repair
        by howardc64
        Problem

        This is an LG edge LED lit LCD Display. The LEDs are on the bottom edge of the display. There are 2 bars (left and right) Each bar has many LEDs and a 6 pin connector. Each pin drive several LEDs thus is the highest current flow / heat junction. The weak lead free solder gradually fails with thermal expansion/contraction cycling and increases resistance. PSU will compensate up to a point, then when the current is too high, PSU just shut down the backlight causing a dark display. I have even seen one which the connector just fell off as solder points became completely detached....
        08-04-2024, 10:36 PM
      • Loading...
      • No more items.
      Working...