malfunctioning GDRom Board a Cap has blown on it , how to test with a DDM ?

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • s8n
    New Member
    • May 2008
    • 2
    #1

    malfunctioning GDRom Board a Cap has blown on it , how to test with a DDM ?

    hi scene , i have a Dreamcast with a malfunctioning GDRom Board a Cap has blown on it. I want to test each one and replace the dead culprit. How do i test them with a DDM ?

    pic of GDRom Board





    any info helps

    s8n
    Tags: None
    • s8n
      New Member
      • May 2008
      • 2
      #2
      Re: malfunctioning GDRom Board a Cap has blown on it , how to test with a DDM ?

      hi again , i found some info Googling and tried that. 3 of 10 Caps wouldnt charge and am going to replace them.

      thanx for all pending posts

      s8n

        Comment

        Previous template Next

        Related Topics

        Collapse
        • m1ch43lzm
          HP Pavilion 15-eh Board DAG7HAMB8F0 - CPU throttling to 0.4GHz (PROCHOT_EXT) and black screen
          by m1ch43lzm
          Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
          Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic...
          05-12-2025, 08:37 PM
        • Tynan Dill
          Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
          by Tynan Dill
          I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

          Upon bringing it home and plugging it up, it showed a standby light.

          I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

          The screen seems to blackout and stay black, but with a flashlight I can see the display.

          With my Playstation 4 connected via HDMI, and running a game I can hear sound.

          Assuming...
          ORIGINAL POWER SUPPLY BOARD
          7 Photos
          11-22-2024, 01:46 PM
        • sfernandes
          Sega Dreamcast NTSC-U Revision 0 Launch Unit GD ROM PCB Board Short
          by sfernandes
          Hi everyone,

          Symptom: When I press the power button the power LED lights up for a second and the fan etc spins for a second then the unit turns itself off and will not do the same thing again unless I unplug the power cable for a few minutes then plug it back in otherwise if I just turn the power switch off and back on right after it comes on for a second it will not come on again unless like I said unplug the power cord for a few minutes then plug it back in.

          What I have done to try to isolate the issue so far:

          The system powers on and stays on with...
          01-23-2023, 06:03 PM
        • odtech
          Asus UX490U laptop blown (caps?) on power board.
          by odtech
          Greetings friends.

          I was given this nice little laptop and would like to revive it if possible but i'm stuck identifying blown components. I'm very new to the repair game so i'm proceeding very cautiously.

          I don't know the history of this laptop and the donator didn't elaborate what happened but it seems some moisture got into the USB C charge port and the result was what looks like some blown caps. The tell is some gunk inside the USB C port and corrosion on the outside as well as what looks like corrosion around the blown components.

          Any guidance...
          08-06-2023, 10:29 AM
        • Hakuu
          LG OLED77G1PUA - No Video / Audio after a TCON Board change and Software Update
          by Hakuu
          Hi There,

          This TV was auto switching off after few seconds with some vertical lines on the screen, so got a new TCON board and replaced it.

          After replacing the TCON board it was working fine and i set it up with everything, used for few hours, then had the bright idea to update the software on it. During the update process, TV switched off and now no audio or video. No relay switch sound.

          More Details

          TV Model - LG OLED77G1PUA

          Got the same exact TCON board from TVPartsToday and replaced it. But didnt transfer the EPPROM data (didnt...
          07-12-2023, 02:37 PM
        • Loading...
        • No more items.
        Working...