Xicon at mouser?

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Al
    New Member
    • Jan 2005
    • 5
    #1

    Xicon at mouser?

    are they any good? I'm looking at these:

    140-ESRL16V2200 Xicon Low ESR Radial Electrolytic Capacitors
    16V 2200uF 105C $ 1.580

    140-ESRL25V1000 Xicon Low ESR Radial Electrolytic Capacitors
    25V 1000uF 105C $ 1.340

    140-ESRL25V470 Xicon Low ESR Radial Electrolytic Capacitors
    25V 470uF 105C $ 0.860

    Thanks.


    =====

    note: I'm just looking to fix one computer, without getting gouged on the cost of caps.
    Tags: None
    • willawake
      Super Modulator
      • Nov 2003
      • 8457
      • Greece
      #2
      i have seen no reports of Xicon (Taiwan) fail. They look kinda expensive at that price though. The panasonic FC and nichicon (with proven track record) are too much more expensive for you?
      capacitor lab yachtmati techmati

        Comment

        Previous template Next

        Related Topics

        Collapse
        • ajdrenter
          Picking caps for Antec SU-380
          by ajdrenter
          In my search for a proper 5v heavy ATX power supply, I selected an old Antec SU-380 that I've had in storage for a long time. Opening the power supply reveals a couple bulged capacitors. I removed all the caps and made a map for myself. I found the datasheet for the PCE TUR series in this thread:
          https://www.badcaps.net/forum/showthread.php?t=14159
          It says these are general purpose, so I assume I can replace them with any general purpose capacitors, but I don't really know anything about power supply circuits or reading capacitor datasheets. Despite this, I've been shopping for replacements:...
          05-13-2023, 10:40 AM
        • TomGJ
          Genelec 8020C Bad capacitor
          by TomGJ
          Hi All, So I have two Genelec 8020Cs that are about 10 years old, one of them stopped switching on. I took it apart, fuse was blown, and I've traced the short to one of the two large capacitors on the circuit board.

          Now from looking at the Capacitors, they seem to be from Samwha's SD Series with the following specs: 3300uf, 35v, 85C, 25 x 16 mm Radial.

          The problem is, I can't find any capacitor from Samwha's SD Datasheet that matches these specs. The closest is 3300uf, 35v, 85c but 31.5 x 16mm, with a max ripple current of 2.5A. I'm guessing the 25mm is custom made for...
          11-02-2024, 07:45 AM
        • brad2157
          Decon SH PET Capacitors for “Klipsch The Fives”
          by brad2157
          I’m working on re-capping the power board caps on a Klipsch The Fives audio speaker system. I can’t locate a replacement for these original caps that are labeled “Decon SH PET”. I have three of these on the board with the electrolytics. They are supposed to be a film type capacitor, but they look like a radial mount electrolytic. Everything I find they look completely different, usually a square type body. The two values I need are 16V 470uF and 35V 47uF. I’ve got all the other caps in my cart already from Mouser, so if there’s a replacement there, I would prefer to order from...
          5 Photos
          10-21-2024, 09:47 PM
        • quickname
          Cyberpower 1500AVR UPS repair
          by quickname
          I'd like to start out by thanking this forum for providing the info to be able to repair my 15 year old CP1500AVRLCD UPS. Here is all the info I gathered during my trouble-shooting and re-capping.

          Like clockwork, I've had to replace the SLA batteries every 4 years. It was about that time and the UPS was acting like it needed new batteries... randomly shutting off with AC present, not being able to charge fully, and poor runtime when AC was removed. So, I replaced the batteries but noticed that it was not charging properly.

          I decided to verify that the batteries were...
          11-12-2023, 09:57 AM
        • ten-d
          Nippon Chemi-con 100uf 100v BP electrolytic cap
          by ten-d
          Hi all!

          I just bought a pair of ADS L810 speakers, which I've heard are some of the best speakers from that time (late 70's) into the early 80's. I was super excited to test them out and hooked them up and I was very underwhelmed by the treble. The treble was awfully muffled. I've been doing some restoration work on 70's stereos and a couple of speakers here and there so I am really just a beginner. I do know that capacitors in speaker crossovers filter out the lows to allow only the highs up to the tweeters and mids. Inductors filter out the highs to allow the lower frequencies to...
          3 Photos
          01-30-2024, 05:18 PM
        • Loading...
        • No more items.
        Working...