Announcement

Collapse
No announcement yet.

Please help me identify these caps

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
    #1

    Please help me identify these caps

    Hello, these are in an old 500w power supply.
    I cannot seam to find any info on the following:
    IM0310
    IM0318
    IM0210

    Thank you.
    Attached Files
    Tags: None
    #2
    Re: Please help me identify these caps

    Do they have anything else on them? A brand name or logo perhaps?

    If in doubt, Panasonic FM or FC should work fine as replacements, according to most on here.
    Last edited by Agent24; 07-12-2015, 10:49 PM.
    "Tantalum for the brave, Solid Aluminium for the wise, Wet Electrolytic for the adventurous"
    -David VanHorn

    Comment

      #3
      Re: Please help me identify these caps

      that is all that is on them sadly, I couldn't find anything more. its probably 15 years old.

      Comment

        #4
        Re: Please help me identify these caps

        No surprise really, that K vent is only used by Rubycon officially, everyone else who uses it are fakers like Rulycon or other rubbish...

        Just use a middle of the road Low ESR series for replacement. Don't use General Purpose or Ultra Low ESR. Make sure they're 105 degree rated.

        See https://www.badcaps.net/forum/showthread.php?t=2280 for ideas.
        Last edited by Agent24; 07-12-2015, 11:32 PM.
        "Tantalum for the brave, Solid Aluminium for the wise, Wet Electrolytic for the adventurous"
        -David VanHorn

        Comment

          #5
          Re: Please help me identify these caps

          You need to try and take a clear picture of the opposite side of those capacitors, as there is obviously some sort of logo and whatnot on the back side of them.

          It looks like it could be perhaps JEE capacitors?
          Last edited by MassBoost; 07-12-2015, 11:49 PM.

          Comment

            #6
            Re: Please help me identify these caps

            They're JEE/F-yoo "low ESR" junk. Note the ripoff/fake K vent, imitating Rubycon. Garbage by appearance, garbage by nature.

            I once tried non-swollen ones for the bulk filters in an FM transmitter kit. Horrible! GP caps were better.

            Replace all with Nichicon HE or PW, or Panasonic FC.
            "pokemon go... to hell!"

            EOL it...
            Originally posted by shango066
            All style and no substance.
            Originally posted by smashstuff30
            guilty,guilty,guilty,guilty!
            guilty of being cheap-made!

            Comment

              #7
              Re: Please help me identify these caps

              Hi guys, can you help me to identify this capacitor (also attached)? I want to have it replaced because it looks a little bit inflated which I've never seen on this kind of capacitors.
              Many thanks.
              Attached Files

              Comment

                #8
                Re: Please help me identify these caps

                that's a solid polymer cap.
                http://www.fpcap.jp/

                Comment

                  #9
                  Re: Please help me identify these caps

                  It is, but can you help me to read its value and voltage? The value I believe it's 560uF but I'm not so sure about the voltage, I'm puzzled by that "04" from the end. Please help, I'd like to replace it. Thanks.

                  Comment

                    #10
                    Re: Please help me identify these caps

                    560uf 4v

                    Comment

                      #11
                      Re: Please help me identify these caps

                      Thanks!

                      Comment

                      Previous template Next
                      Working...
                      X