PLACE TO GET CAPS

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • cwdesign
    New Member
    • Jan 2005
    • 2
    #1

    PLACE TO GET CAPS

    I have found a place to get the CAPS needed for most motherboards. If you go to www.mouser.com/nichicon here you can find the 6.3v 3300uf 10MM caps.

    The part number for the 3300uf 6.3v is: 647-UVZ0J332MPD .72 each or .53 each in quantity of 10.

    These are rated at 105 C
    Tags: None
    • bushytails
      Moderator
      • Dec 2004
      • 217
      #2
      VZ series is not low-esr...

      --Randy

        Comment

        • cwdesign
          New Member
          • Jan 2005
          • 2
          #3
          Not Low ESR

          I have used these to replace some badcaps that I had on a P4 motherboard and its been running for about 7 months with no problems.

            Comment

            • Al
              New Member
              • Jan 2005
              • 5
              #4
              Originally posted by bushytails
              VZ series is not low-esr...

              --Randy
              what about the UPW series? They say "low impedance", but not "low ESR". Might they work anyway?


              [P.S. After posting this, I see that quoting isn't working. Also, I just had a devil of a time during every attempt at posting: I'd be asked to login, although I was already logged in. But it would reject my password. Then, the problem suddenly cleared up.]

                Comment

                • bushytails
                  Moderator
                  • Dec 2004
                  • 217
                  #5
                  Low impedance implies low ESR, as a high series resistance would raise the impedance.

                  --Randy

                    Comment

                    Previous template Next

                    Related Topics

                    Collapse
                    • momaka
                      Seasonic B12 BC-550 – barely 2 years old and with BAD CAPS already!
                      by momaka
                      I know I've been a little scarce lately (like the last 2-3 years), but I'm still here and still doing my thing with fixing PSUs.

                      For today's considerations, I have a Seasonic B12 BC-550 [A551bcafh] 550 Watt ATX power supply for you (click on links for full size images).

                      https://www.badcaps.net/filedata/fetch?id=3591771


                      https://www.badcaps.net/filedata/fetch?id=3591772

                      It's a modern ATX unit with fixed (non-modular) cables and an 80-plus bronze certificate. Here's the label:

                      https://www.badcaps.net/filedata/fetch?id=359177...
                      03-12-2025, 03:42 PM
                    • tony359
                      Best tool to place electrolytic SMD caps on a board
                      by tony359
                      HI all,

                      I am working on some boards where all 100+ SMD caps have to be replaced (yes, they actually went bad!). I found a workflow to remove them comfortably (two irons, pre-heater and extra hot air for larger ones on ground planes).
                      When it comes to soldering them back, I add solder to one pad and then I use a plastic tweezer to keep them in the right place while I solder that leg.

                      The tweezer works - but I was wondering if there is a more "dedicated" tool or whether someone has a better idea. If it was for a bunch of caps then who cares. But because...
                      01-28-2024, 06:23 AM
                    • eryjus
                      Heathkit IO-4205 Power Supply Caps
                      by eryjus
                      Hello,

                      First, I am a complete noob with high voltage stuff. I'm learning, but I need help by someone looking over my shoulder.

                      I recently came into posession of a Heathkit IO-4205 5MHz Dual Trace Oscilloscope. The documentation is copyright 1978. I'm told it works.

                      I opened it up to check the caps before I applied power, and found the following black caps and wanted to know what they were. They are on the power supply board. I was able to read the name and model and came up with, "Nytronics 162J-1, 0.1uF, 20% tolerance, 2000VDC."
                      ...
                      05-10-2023, 11:21 AM
                    • Paxman_Swede
                      Identifying caps on an old Zoom 9000
                      by Paxman_Swede
                      Hello!

                      I have two projects on my work bench. One is a friends dead JBL Xtreme speaker with a blown voltage regulator and corresponding bulged and shorted cap. That cap has clear markings so I know what replacement I need for it.

                      The other project however is a whole different deal. It's a Zoom 9000 guitar effect from the 90th that has developed a devil hound howl when there is no input from the guitar. I'm guessing caps problem. So, since I don't really use this effect anymore I thought it would be a perfect project to learn on.

                      I have studied the board and...
                      01-14-2025, 09:51 AM
                    • captain150
                      Help with switching power supply caps
                      by captain150
                      I'm trying to repair two old VCRs, they both have bad caps. One has leaky ones, the other would barely run until I subbed in some caps from another power supply I had laying around (though they are the wrong values). This vcr works for an hour or two, but then the power supply starts whining and the picture gets lines in it. I didn't replace all the secondary caps, so another voltage might still be problematic, or the values I used are too far off.
                      I've been on mouser and digikey but the options are a bit overwhelming. I just need some new ones that will work. They don't need to be top quality,...
                      03-16-2025, 07:34 PM
                    • Loading...
                    • No more items.
                    Working...