Recapping problems

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • cocosionutrazvan
    New Member
    • Feb 2007
    • 1

    #1

    Recapping problems

    Hi. I recapp an old motherboard, i change two capacitors 6,3v 2700uf with 10v 1500uf and the motherboard not start.The value is wrong?
  • kc8adu
    Super Moderator
    • Nov 2003
    • 8832
    • U.S.A!

    #2
    Re: Recapping problems

    i always go to 3300 if i dont have 2700 in stock.
    did it post before?

    Comment

    Related Topics

    Collapse

    • jean luc ferre
      laptop hp g72 b52sf screen problems
      by jean luc ferre
      Hello,
      on this laptop hp g72 b52sf i have screen problems as you can see with the photo joined in attachments.
      the used graphic card is "intel hd graphics" and the id of the integrated screen is : "monitor/SEC3354".
      i verified the driver of the péripherals and they are ok. i verified the definition and settings of the graphic card and of the screen : definition 1600x900 and refreshment frequency :60hz. (they are the sames for the graphic card and the screen).
      i don't understand the reasons of the white stripe at the bottom of the screen below the task...
      06-07-2025, 03:27 PM
    • Hondaman
      USB problems?
      by Hondaman
      Recently I discovered my SSD died (OCZ/Toshiba 240 GB). It was in a USB enclosure, attached to the Linksys WRT-AC1200 router. Since then I removed the USB enclosure and attached it to my Win7 PC (AMD 8150 CPU, 970 chipset, 64 GB RAM). I also gathered one or two other USB enclosures to figure out what is going on.

      (I suspect that I lost quite a few MP3 and FLAC files I recently ripped from my audio CDs, I think I lost very little un-replaceable stuff.)

      I think it is IMPOSSIBLE for Win7 to have any problems with a USB enclosure as long as Win7 knows how to speak to the...
      08-12-2024, 03:26 PM
    • clabr
      Lenovo 11e problems (any sata hdds are not recognized, sleep battery drain)
      by clabr
      Need help to solve some problems with this laptop.

      After working in bed with it one night and heating up too much (probably the cause of this problems) the sata HDD OS windows froze
      After restart the original Sata HDD was not recognized anymore (but works fine in other laptops or PCs)

      Tried connecting other good Sata 2.5 HDDs but not one is working in this laptop anymore (not the original nor others)

      Before this had happened I observed some other problems:
      When I tried replacing original mecanical HDD with a SSD HDD could not get them...
      12-02-2021, 08:09 AM
    • proxneo
      Recapping Sony ICF-SW55 - verifying cap values
      by proxneo
      Dear reader

      I am performing a repair on a Sony ICF-SW55, which includes recapping (some) of the SMD capacitors on the mainboard. I am looking for verification of their values. At the moment, I'm 95% sure I've got the right values, but it is hard to find some official, credible or multiple independant sources on this.

      At the moment, I have selected replacements based on the following list of values:

      3 x 470uF 10VDC
      3 x 4.7uF 35VDC
      4 x 47uF 50VDC
      8 x 22uF 6.3 VDC
      1 x 220uF 6.3VDC
      5 x 100uF 6.3VDC

      Which...
      06-21-2023, 12:38 AM
    • jean luc ferre
      display screen problems after changing motherboard
      by jean luc ferre
      Hello,
      First on my laptop i had a motherboard with a pentium 6100 processor. Installing w11 i was blocked on the 23h2 version...impossibility to upgrade toward 24h2 because the SSE4.2 functionnality of the cpu was missing. About displaying and screen looking all was perfect.
      I changed of motherboard with an intel I3 processor...and now i don't find the previous aspects of the displaying.
      Now i have a veiled screen and pixels are missing though the graphics parameters have not changed.
      Desinstalling and reloading the drivers in the same time on the graphic card (intel hd...
      09-11-2025, 10:28 AM
    • Loading...
    • No more items.
    Working...