why the cap is not on the datasheet??? Fake???

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • supersabre
    Member
    • Feb 2006
    • 45

    #1

    why the cap is not on the datasheet??? Fake???

    I always see Hermei brand LE series capacitors that fail in the power supply.
    They are 10x15mm 16v 1000uF.

    I check the datasheet



    but i don't see 16v 1000uF cap with 10x15mm .

    The LE series has only 10x21mm for 16v 1000uf.

    Question.Is the cap fake? Or Is the datasheet a joke?
    what 's real voltage and capacitance for this cap?
    Last edited by supersabre; 09-15-2007, 11:38 PM.
  • PeteS in CA
    Badcaps Legend
    • Aug 2005
    • 3581
    • USA, Unsure of Planet

    #2
    Re: why the cap is not on the datasheet??? Fake???

    I'm not familiar with the brand. Two things may be in play. First, mfrs. datasheets are not necessarily up to date. Thus there may be standard products, recently introduced, that aren't on the datasheet. Second, for some mfrs., including a major such as UCC/NCC, custom parts are a substantial part of what they produce. So that Hermei cap may be a custom.
    PeteS in CA

    Power Supplies should be boring: No loud noises, no bright flashes, and no bad smells.
    ****************************
    To kill personal responsibility, initiative or success, punish it by taxing it. To encourage irresponsibility, improvidence, dependence and failure, reward it by subsidizing it.
    ****************************

    Comment

    • Big Pope
      Approved Vendor
      • Dec 2005
      • 426

      #3
      Re: why the cap is not on the datasheet??? Fake???

      Originally posted by PeteS in CA
      So that Hermei cap may be a custom.
      Agree.
      My SAMXON Capacitors Database HERE!!

      X-CON is a new brand for SAMXON's Polymer Capacitors.

      Comment

      Related Topics

      Collapse

      • Junkrepair
        Calculating ESR from tan delta -- tan delta's dependence on capacitance
        by Junkrepair
        I'm finally recapping my Soyo K7VX6 motherboard (aka KT600 Dragon Ultra) and replacing Sacon SZ-series caps. The Sacon SZ datasheet provides a spec for tan delta, but not for ESR, while the candidate replacement caps are specified in terms of ESR.

        I found this nice little description of the conversion:

        Calculating capacitor ESR from Tan(delta)
        https://forum.digikey.com/t/calculat...-from-tan/2633

        It mentions that a general spec for tan delta has to be adjusted for the specific capacitance before plugging tan delta into the formula...
        06-12-2023, 02:45 PM
      • SoulFreeze
        Help finding datasheet for component marked G34662
        by SoulFreeze
        Hi, pulled this component, (I'm assuming it's a MosFET) from an LED COB video light. Im trying to find the datasheet so I can find an equivalent replacement but no luck. Any assistance with the datasheet would be appreciated.

        Failing that, a way to pick a suitable replacement component? If it's indeed a switching fet, I'm assuming I might need to measure the switching clock frequency and find a component that meets the power capacity?

        Its a pair of them driving a 130w Light. Takes in 19volts. I can borrow a scope to measure the switching freq....
        05-01-2025, 03:56 AM
      • Rainbow_Chameleon
        Searching Datasheet for AM113 IC by O2MICRO
        by Rainbow_Chameleon
        I got a dead HD6950 on Ebay to try my luck and repair it. There were a few broken off capacitors that I already replaced.
        Measuring the PCI-E lanes I got somewhat weird measurements, the gpu might or might not be dead.

        If I plug the GPU in, the core heats up and I also get VCore but on two inductors that measure 16 and 60 Ohms respectively (Memory and PEX I guess) there is no voltage.
        On one of the two buck-controllers (APW7165) the enable pin is pulled to GND and the other controller I just cannot find a datasheet for.

        So if anyone has a datasheet or at least...
        01-23-2025, 12:03 PM
      • Document Archive
        Surface Mount Fuses Fundamentals Datasheet
        by Document Archive
        TE Circuit Protection offers the widest selection of surface-mount fuses available for addressing a broad range of overcurrent protection applications. Helping to prevent costly damage and promote a safe environment for electronic and electrical equipment, our single-use chip fuses provide performance stability to support applications with current ratings from .5A up to 20A.

        TE Circuit Protection also offers the telecom FT600 fuse for telecommunications applications. This telecom fuse helps comply with North American overcurrent protection requirements, including Telcordia, GR-1089,...
        10-07-2024, 06:07 AM
      • paparazzo79
        Fake magsafe 2 charger
        by paparazzo79
        Hi guys.I bought Macbook Pro mid 2014 15 inch model which did not came with charger.
        I got new charger but judging by the specs seems it is fake one.Sadly I live in Bosnia and genuine charger is rare to find.
        what to do?Should I use the fake one?
        Will it damage the macbook?...
        10-02-2024, 08:18 AM
      • Loading...
      • No more items.
      Working...