Rubycon LLE 450v 68uF Seller

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • tjg79
    Member
    • Sep 2013
    • 49
    • USA

    #1

    Rubycon LLE 450v 68uF Seller

    Hi,

    I'm looking for a source to buy the following cap:

    Rubycon LLE Series 450v 68uF 105˚C

    I'm replacing two Su'scon SK Series 450v 68uF 105˚C caps on an LG L227WTG monitor power board.

    From comparing the datasheets, the Rubycon is a perfect fit.

    My internet searches haven't revealed a seller yet.

    Thanks for the assistance.

    Regards
  • mockingbird
    Badcaps Legend
    • Dec 2008
    • 5484
    • -

    #2
    Re: Rubycon LLE 450v 68uF Seller

    Here you go:

    Link

    Not precisely what you were looking for, but this is also 18x31.5 and might only be a 10,000 hour part as opposed to the LLE's 20,000 hour spec (Never seen a 20,000 hour cap before, thanks for bringing this series to my attention), but 10,000 is also pretty impressive.

    Comment

    • lexwalker
      Badcaps Veteran
      • Feb 2011
      • 307
      • Malaysia

      #3
      Re: Rubycon LLE 450v 68uF Seller

      Originally posted by tjg79
      I'm looking for a source to buy the following cap:

      Rubycon LLE Series 450v 68uF 105˚C

      I'm replacing two Su'scon SK Series 450v 68uF 105˚C caps on an LG L227WTG monitor power board.

      From comparing the datasheets, the Rubycon is a perfect fit.

      My internet searches haven't revealed a seller yet.

      Thanks for the assistance.

      Regards
      Besides Nippon Chemi-Con KXG series, can take a look at Rubycon BXW series. Can find it on Digikey. Another recommendation would be Nichicon CS series which has very impressive specifications. Sold out at Digikey and Newark but you can find it on Mouser. If there is enough space on that board for a longer/higher capacitor (up to 40mm) then can consider Panasonic ED series or Panasonic EE series. All of them are long life capacitors, up to 10,000 hours...
      Last edited by lexwalker; 07-29-2014, 12:09 AM.

      Comment

      Related Topics

      Collapse

      • samoelec
        Trying to understand how to find best replacement cap for old parts.
        by samoelec
        Disclaimer: This is the first time I step into the realm of analog electronics and my natural language is not English, so please forgive me if I failed to use the correct terms when describing things.


        Recently I purchased a Tektronix TDS1012, a 20 years old product for cheap and I thought it could be a nice opportunity for playing (i.e. recapping) and learn something in the process.
        The power supply board is exactly the same from this post so I'll just steal it for now.

        I'm trying to find replacements for all those Lelon electrolytic caps, but then quickly...
        04-01-2024, 03:39 AM
      • slybunda
        Elite Capacitors? (450v 47uf power board Toshiba Vestel TV)
        by slybunda
        anyone heard of these caps before? at first glance i mistook them to be Elna caps but closer look and it was elite. not sure if they are known failure prone brand.
        also they are 47uf and 450v. why are they so large in height? i can get replacement 450v 47uf caps that are a quarter the height. what am i missing here?

        if i were to replace them what should i be looking for?

        they are on the power board of a toshiba (vestel) tv power board.
        pic attached...
        11-13-2023, 06:33 AM
      • yuzupatogik
        Help with replacing Capacitors on Altec Lansing ATP 3
        by yuzupatogik
        Hello,
        I have this old (2004?) Altec Lansing ATP3 and i would like to replace the capacitors. I have identified 34 out of the 36 of them as Samxon GR of various capacities and voltages.

        I can't find datasheets for the Samxon in any of the following variants:

        10000uF 25 v - this one i really want to replace because i suspect it is what causes a dull hum regardless of the volume knob position or if the source is plugged in. I am eyeballing the Rubycon 25PK10000MEFCGC18X35.5 for this purpose. So if i pay a 10x the price part for shipping i might as well go ahead and...
        02-14-2025, 04:11 PM
      • CdDvdFlash
        Help to bring cost down for 15 Caps
        by CdDvdFlash
        Hi all, I have 15 capacitors to replace of varying voltage and uF I looked on RS Online but I can only buy them in the least of a 5 pack when I only need one or two or three of a type, so far I'm trying to get the price down from $47.10 and thats without postage so where online is a good place to buy caps in 1,2,3 or 4 at a time. They are all electrolytic caps and I'm choosing Nippon Chemi-Con or Rubycon or Nichicon etc. as long as they are good quality. I need the capacitors in a power supply for a friends DVD/VCR combo player so another question I have is, would all the capacitors be DC and...
        11-01-2021, 01:52 AM
      • ajdrenter
        Picking caps for Antec SU-380
        by ajdrenter
        In my search for a proper 5v heavy ATX power supply, I selected an old Antec SU-380 that I've had in storage for a long time. Opening the power supply reveals a couple bulged capacitors. I removed all the caps and made a map for myself. I found the datasheet for the PCE TUR series in this thread:
        https://www.badcaps.net/forum/showthread.php?t=14159
        It says these are general purpose, so I assume I can replace them with any general purpose capacitors, but I don't really know anything about power supply circuits or reading capacitor datasheets. Despite this, I've been shopping for replacements:...
        05-13-2023, 10:40 AM
      • Loading...
      • No more items.
      Working...