Can I use these 1000uF 35V 20% Radial-lead Electrolytic Capacitor insted of 1000uf 6.5v on my msi mother board???
-
-
Re: Radio Shack???
need brand series of the caps to make that decision. i would expect anyway that 35v caps would be too big to fit. -
Re: Radio Shack???
This 1000 microfarad 35V 20% radial-lead electrolytic capacitor can help you with many of your electronics projects.
35WVDC Operating temperature: --40 to +85°C
What's in the box
1000uF 35V 20% Radial-lead electrolytic capacitor (1)Comment
-
-
Re: Radio Shack???
what should it be?Comment
-
Re: Radio Shack???
should be 105oC but that is not the only parameter.
check here for which caps to buy
https://www.badcaps.net/forum/showthread.php?t=2280Comment
-
hi
ive got a modern digital clock radio approx 15yrs old
my question is how long can a clock radio or a simple radio last ss farcas operating hours?
since elec components have limited hour lifecspan i would imagine the radio or clock radio would eventually fail.
the reason i ask is because i have my clock radio on radio function 24/7 for the past 7 years and its still working fine....i leave the radio on ..never turn off past 7years...thats approx 60000 hours
it uses very little power just a few watts i would imagine that may have something... -
Dear all,
I have this old radio clock by Sony from the early 80s, I guess. The clock display works, but is dim, the function board appears to be OK - but the radio unit shows no signs of life. It doesn't produce a single noise, crack or anything from either FM or AM band. It's like it doesn't even power up.
i opened the radio and it is full of some TRACON gray capacitors. They only have their negative strip printed, voltage and capacitace markings - no series, no temperature marking, nothing else.
My question is, do you know of this brand of capacitors and how bad are... -
Hello All,
I have an issue with my Majority PETERHOUSE GRADUATE Internet Radio, it keeps rebooting at the boot logo Welcome screen. I have an another forum active in other website but due to lack of response I am posting the same here. I am positing a link below that has pictures including all the troubleshooting I have tried, appreciate if someone can take a look and give me any suggestions.
https://www.hifivision.com/threads/m...-screen.98243/
Troubleshooting Summary: Majority Internet Radio - Flash Chip... -
04-24-2025, 07:54 PM
-
I'm trying to fix a digital multimeter. It was working until I blew the fuse (actually the "buzz" for continuity wasn't working). I've now replaced the fuse but it's acting strangely. When I turn the dial to V, nothing happens. But when I turn to anything else, it makes a continuous, very fast clicking sound - like the piezo buzzer is trying to do something. And at each position of the dial (other than V) there are brief flashes of life on the LCD. It doesn't seem to matter if the probes are connected. I wasn't sure where to start, so I've tested most of the diodes and cleaned the...
Comment