Well, I sweated a bunch - and got concerned about cold joints - but prior practice was valuable getting through this. The caps around the memory was tough to remove. The stainless steel pick idea on clearing holes was very valuable.
At first, I thought it was bad as I received C1 on second boot (first one was OK). But it turned out to be RAM that wasn't seated properly. This board is great!
I did it!
freeportd
At first, I thought it was bad as I received C1 on second boot (first one was OK). But it turned out to be RAM that wasn't seated properly. This board is great!
I did it!
freeportd
Comment