Datasheet for G-Luxon LD-series needed!!

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • ZippZapp
    New Member
    • Oct 2012
    • 2
    • Norway

    #1

    Datasheet for G-Luxon LD-series needed!!

    Hi,

    I have identified a bad capacitor in a power-supply (produced in 2006), and I'm desperate to find the datasheet for this old G-Luxon capacitor. It is claerly marked with "LD105°C" which indicates a capacitor in the LD-series. The problem is that I cannot find any reference to any LD-series of capacitors from G-Luxon.

    Does anyone have an old LD-series datasheet downloaded (or printed)?
    I would very much appreciate if you could share it with me (and others).


    Best regards,
    ZippZapp
    Attached Files

    if you find these attachements useful please consider making a small donation to the site

  • mariushm
    Badcaps Legend
    • May 2011
    • 3799

    #2
    Re: Datasheet for G-Luxon LD-series needed!!

    Nope, unfortunately I don't have it.

    I (and a few other members here) have a large collection of datasheets, mine is available here :

    ftp://helpedia.com/pub/temp/datasheets/capacitors/

    This pdf below suggests what Luxon capacitors should be used to replace capacitors made by other brands:



    LD appears there as ELD often along with ELZ (LZ series). So this may suggest LD is comparable with LZ series from G-Luxon.

    Rubycon JXA , Nichicon PM are among the ones they recommend LD for, and that sounds about right looking at the LZ datasheet.

    Look at LZ series datasheet or Rubycon JXA and replace with something similar.

    Comment

    • HPaulRobinson
      New Member
      • Jan 2017
      • 2
      • Canada

      #3
      Re: Datasheet for G-Luxon LD-series needed!!

      I have attempted to attach the Data Sheet for the G-Luxon LD series. (My friend had to go back to a 1997 catalogue to get this.)

      Later,
      Paul
      Attached Files

      if you find these attachements useful please consider making a small donation to the site

      Comment

      • Blackideas
        New Member
        • Mar 2022
        • 1
        • France

        #4
        Re: Datasheet for G-Luxon LD-series needed!!

        Hi, even if the post is old:
        thank you so much for the datasheet and time you spend to post it, it has been very useful for me.
        Have a nice day, take care of you and your family.

        Comment

        • Uranium-235
          Comrade Glimmer
          • Aug 2007
          • 5045
          • US

          #5
          Re: Datasheet for G-Luxon LD-series needed!!

          Every time I hear that brands name this image enters my head
          Attached Files

          if you find these attachements useful please consider making a small donation to the site

          Cap Datasheet Depot: http://www.paullinebarger.net/DS/
          ^If you have datasheets not listed PM me

          Comment

          Related Topics

          Collapse

          • MORETTIGIAN
            Capacitor detached from PCB – RTX 2070 Super Founders Edition
            by MORETTIGIAN
            Title:
            Capacitor detached from PCB – RTX 2070 Super Founders Edition

            Description:
            During maintenance on an RTX 2070 SUPER Founders Edition, I found a capacitor lying on my desk after reassembly.
            I did not notice it detaching, so I am unsure of its original location on the PCB.

            Procedure performed:
            - Removed backplate
            - Cleaned heatsink and PCB with isopropyl alcohol + soft ESD brush
            - Reapplied thermal compound
            - Reassembled card

            Observed behavior after reassembly:
            - GPU powers on and operates normally under...
            09-18-2025, 12:14 PM
          • veedo
            Asus FA507R no power, capacitor needed
            by veedo
            Hello
            I've got an Asus laptop which received with no power, so I found that one capacitor been damaged. I don't have schematics for that board which is DANJMMB11A0 REV:A
            Without that caps laptop is turning on fine so problem more likely is sorted but I would like to put back the correct one as it should be.
            If any way could help with sorting out specification somehow, I just know that my meter shows 11,2uF but is it 50V or 10V ?? or any others.
            See attached photo off the capacitor, maybe someone have same motherboard and can check it for me please.
            ...
            03-24-2024, 01:16 PM
          • Prolog
            RTX 3080 FE Identifying capacitor
            by Prolog
            Hi people, I hope this is the correct spot to post this, I'm new to the forum.

            I have an RTX 3080 Founders Edition which has a burnt up capacitor (it was in parallel with another capacitor which appears damaged too), so I am hoping to be able to identify the capacitor values and order replacements.

            I hope these photos make it clear which component I am referring to:
            (yes, the soldering is a bit botched from removing the blown one, I know)

            I have found the board schematic (attached), but there does not seem to be a boardview available. I have never...
            12-01-2024, 08:27 PM
          • Agent24
            Dick Smith Q-1760 linear power supply filter capacitor question
            by Agent24
            I have acquired a used Dick Smith Q-1760 power supply - although the OEM is Manson Industrial
            It has at least one problem.

            The voltage control potentiometer VR2, 50K is faulty - going high resistance / open circuit in the CCW end and leading to the output voltage jumping around.
            I have already ordered a replacement potentiometer, so that's not an issue.

            Now, I want to replace all three electrolytics on the PCB as they are CapXon and I don't trust them so much, I will replace them with something better while I've got the thing apart anyway.
            All are CapXon...
            10-21-2025, 05:39 PM
          • chth96
            If I replace with inferior capacitor, Is it No harm to other IC components at all?
            by chth96
            I replaced some capacitor which is located on optical pickup pcb which is shown in the table below(PCB #2).Because it have been out of order.
            Now,It works very well,But I just have found that all caps (6svpc100my and other part number as well) ,which is shown in the table below, has ultra-high ripple current spec.
            It is not able to obtain any capacitor which can be a substitute for this ultra-high ripple current nichicon capacitor.
            So I replaced it with samxon and rubycon's general capacitor(GP,YXA series).
            I know that these capacitor will not last as long as nichicon capacitor...
            12-22-2023, 04:34 AM
          • Loading...
          • No more items.
          Working...