I am trying to bring this TV (which got watered (don't ask)) back to life. I have taken the back off and dried out the set. When I plug the set in I can hear a sealed relay activate and relax about every 4 seconds. The green power light does come on with the pressing of the power button. I can see no other action back light, etc occurring. There is no audio. Please help.
Sony TV KDL46V4100
Collapse
X
-
Tags: None
-
Re: Sony TV KDL46V4100
It has got to be something in the power supply. Seems they are easy to find:
http://www.partstore.com/Part/Sony/S...furbished.aspx
Try disconnecting the inverter board from the power supply and see if you get sound and the relay cycling stops. If so the inverter is bad:
http://www.partstore.com/Part/Sony/S...04712/New.aspx
I made a video on repairing switching power supplies that shows the inverter board too:
http://www.youtube.com/watch?v=qJhkLiMR12g
Report back your success. -
Re: Sony TV KDL46V4100
I disconnected the inverter board with the same results. I also disconnected all of the other boards with the same results. I am of the opinion that the power supply is bad. I can see no bad caps so am wondering what components would cause this problem.Comment
-
Re: Sony TV KDL46V4100
I finally discovered where the water got to. I found one dried stream with calcium deposits on the main board (A1506072C). The water came across several pins on the large IC and some pins on a smaller IC at the bottom of the board. It's hard telling what else got shorted out. Net research indicated that there are several versions of this board. How can I determine which version this board is?Comment
-
Re: Sony TV KDL46V4100
having schematic diagram mo your tv will help you so much. you will also need to have special soldering tool to do it.Comment
Related Topics
Collapse
-
by ivtecHi my old Sony i turn it off and it turns itself back up and many times remote wont work have to unplug tv...
-
by sam_sam_samThis happened last Saturday and today I finally had time this morning before I went to work to replace two non brand capacitors
I will let you be the judge weather or not these are bad or not according to the blue ESR meter that I am using
I am comparing them to a brand new one that I installed
The display came back on and the programming was not lost which I was surprised by I would have thought that when the display went blank that so did the memory as well
I going to let it run for several days before I remount back on the wall next to the... -
by NolesFanLike the title states. TV is 3 years old and Im getting 6 red blinks, which is backing lighting issue or driver. I just cant find any info on how to remove the panel to access. Any info would be greatly appreciated.
-
by beetle1303Hi,
I have gotten this Sony KD-65X7000E TV completely dead. According to owner TV was working fine and suddenly blackout and not able to power on again.
Checked and found D751 rectifying diode shorted, replaced and now power up and working almost normally:
1) On power up - display double images, and flicker once every few seconds.
2) After 3-4 minutes at this state - display suddenly back to perfectly normal (although there are few horizontal lines at the bottom of screen).
3) Leaving on for few minutes, power off and on again will repeat the same... -
by Carlos#2003%Buenas mi nombre es carlos me uni al foro porque estoy buscando el schematic de una sony vaio pcg-41217u otras formas de escribirlo son 1p-0117j01-a012 mbx-237 numero de placa revision 1.2 o Sony VPCSB (MBX-237), en fin me gustaria y ayudaria un monton si alguien me puede dar dichi svhematic para hacer las mediciones de una laptop de la mencionada anteriormente(Sony VAIO PCG-41217U) con el fin de repararla dejo de funcionar solo prende el led de la bateria al pulsar el boton de power el disco empiesa a hacer ruido de actividad pero los leds del frontas no reflejan acividad y no enciende la pantalla....
-
Channel: Schematic Requests ONLY!
-
- Loading...
- No more items.
Comment