8600GT Capacitor

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • LoperJChris
    New Member
    • Dec 2011
    • 2
    #1

    8600GT Capacitor

    I've blown two caps on my 8600gt and I just need to make sure I'm purchasing the proper caps. They state on top "FZ28, 1500uF, 6.3v". I'm just not sure which ripple current, etc. to go with. If anyone could point me in the right direction I'd greatly appreciate it!

    Thank you,
    Chris
    Tags: None
    • PCBONEZ
      Grumpy Old Fart
      • Aug 2005
      • 10661
      • USA
      #2
      Re: 8600GT Capacitor

      That's Sacon FZ.
      Bad video cards with those show up like weekly... LOL
      .
      The specs for FZ are posted in the forum in several places.
      https://www.badcaps.net/forum/showpo...88&postcount=2
      .
      Mann-Made Global Warming.
      - We should be more concerned about the Intellectual Climate.
      -
      Be who you are and say what you feel, because those who mind don't matter and those who matter don't mind.
      - Dr Seuss
      -
      You can teach a man to fish and feed him for life, but if he can't handle sushi you must also teach him to cook.
      -

        Comment

        • ratdude747
          Black Sheep
          • Nov 2008
          • 17136
          • USA
          #3
          Re: 8600GT Capacitor

          Originally posted by PCBONEZ
          That's Sacon FZ.
          Bad video cards with those show up like weekly... LOL
          .
          The specs for FZ are posted in the forum in several places.
          https://www.badcaps.net/forum/showpo...88&postcount=2
          .
          yeah, sacon fz was a popular GPU cap... just did a PCI 5500 fx 2 weeks ago with the sacons.
          sigpic

          (Insert witty quote here)

            Comment

            • LoperJChris
              New Member
              • Dec 2011
              • 2
              #4
              Re: 8600GT Capacitor

              Outstanding. Thanks for the assistance.

                Comment

                Previous template Next

                Related Topics

                Collapse
                • MORETTIGIAN
                  Capacitor detached from PCB – RTX 2070 Super Founders Edition
                  by MORETTIGIAN
                  Title:
                  Capacitor detached from PCB – RTX 2070 Super Founders Edition

                  Description:
                  During maintenance on an RTX 2070 SUPER Founders Edition, I found a capacitor lying on my desk after reassembly.
                  I did not notice it detaching, so I am unsure of its original location on the PCB.

                  Procedure performed:
                  - Removed backplate
                  - Cleaned heatsink and PCB with isopropyl alcohol + soft ESD brush
                  - Reapplied thermal compound
                  - Reassembled card

                  Observed behavior after reassembly:
                  - GPU powers on and operates normally under...
                  RTX 2070 SUPER
                  11 Photos
                  09-18-2025, 12:14 PM
                • Prolog
                  RTX 3080 FE Identifying capacitor
                  by Prolog
                  Hi people, I hope this is the correct spot to post this, I'm new to the forum.

                  I have an RTX 3080 Founders Edition which has a burnt up capacitor (it was in parallel with another capacitor which appears damaged too), so I am hoping to be able to identify the capacitor values and order replacements.

                  I hope these photos make it clear which component I am referring to:
                  (yes, the soldering is a bit botched from removing the blown one, I know)

                  I have found the board schematic (attached), but there does not seem to be a boardview available. I have never...
                  12-01-2024, 08:27 PM
                • Agent24
                  Dick Smith Q-1760 linear power supply filter capacitor question
                  by Agent24
                  I have acquired a used Dick Smith Q-1760 power supply - although the OEM is Manson Industrial
                  It has at least one problem.

                  The voltage control potentiometer VR2, 50K is faulty - going high resistance / open circuit in the CCW end and leading to the output voltage jumping around.
                  I have already ordered a replacement potentiometer, so that's not an issue.

                  Now, I want to replace all three electrolytics on the PCB as they are CapXon and I don't trust them so much, I will replace them with something better while I've got the thing apart anyway.
                  All are CapXon...
                  10-21-2025, 05:39 PM
                • chth96
                  If I replace with inferior capacitor, Is it No harm to other IC components at all?
                  by chth96
                  I replaced some capacitor which is located on optical pickup pcb which is shown in the table below(PCB #2).Because it have been out of order.
                  Now,It works very well,But I just have found that all caps (6svpc100my and other part number as well) ,which is shown in the table below, has ultra-high ripple current spec.
                  It is not able to obtain any capacitor which can be a substitute for this ultra-high ripple current nichicon capacitor.
                  So I replaced it with samxon and rubycon's general capacitor(GP,YXA series).
                  I know that these capacitor will not last as long as nichicon capacitor...
                  12-22-2023, 04:34 AM
                • chth96
                  How can I test non-polarized capacitor?
                  by chth96
                  I desoldered samwha NF capacitor(50v 5.6uf) from PCB circuit of 29inch CRT TV which have symptoms of no display after I heard sound of inrush of current to TV whenever I switch on this television.
                  I measured ESR value of this non-polarized capacitor(samwha NF capacitor 50v 5.6uf) by means of MESR-100 ESR meter and It displayed 0.3 ohm

                  And When I measured its capacitance with digital multimeter and LCR-T4 Mega328 meter, It displayed 10uf from DMM and 8uf from LCR-T4 meter.
                  I found catalogue of samwha capacitor(samwha-catalogue_3.pdf file), which is attached to this thread,...
                  06-02-2024, 07:31 PM
                • Loading...
                • No more items.
                Working...