Help with recapping

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • PCBONEZ
    Grumpy Old Fart
    • Aug 2005
    • 10661
    • USA
    #21
    Re: Help with recapping

    If it's 5mm
    http://www.mouser.com/ProductDetail/...Idr2kOipUPg%3d

    If it's 6.3mm
    http://www.mouser.com/ProductDetail/...1Bb7%2f2An8%3d

    .
    Mann-Made Global Warming.
    - We should be more concerned about the Intellectual Climate.
    -
    Be who you are and say what you feel, because those who mind don't matter and those who matter don't mind.
    - Dr Seuss
    -
    You can teach a man to fish and feed him for life, but if he can't handle sushi you must also teach him to cook.
    -

      Comment

      • PCBONEZ
        Grumpy Old Fart
        • Aug 2005
        • 10661
        • USA
        #22
        Re: Help with recapping

        If it's a 16v or more cap use the 6.3mm - or check the actual voltage ..
        .. before using the 10v [5mm] cap.
        Mann-Made Global Warming.
        - We should be more concerned about the Intellectual Climate.
        -
        Be who you are and say what you feel, because those who mind don't matter and those who matter don't mind.
        - Dr Seuss
        -
        You can teach a man to fish and feed him for life, but if he can't handle sushi you must also teach him to cook.
        -

          Comment

          Previous 1 2 template Next

          Related Topics

          Collapse
          • Oldschool297
            RELAND SUN 6.3v 3300uf Low or High ESR?
            by Oldschool297
            I found these, i would only like to try them on a board to see if it post. It don't post at the moment, i guess there are 9 6.3v 3300uf that can be broken. Is these low or high esr? I did not find info on the web.

            https://www.amazon.de/-/en/10-Capaci...s%2C469&sr=8-1
            08-14-2023, 04:32 AM
          • proxneo
            Recapping Sony ICF-SW55 - verifying cap values
            by proxneo
            Dear reader

            I am performing a repair on a Sony ICF-SW55, which includes recapping (some) of the SMD capacitors on the mainboard. I am looking for verification of their values. At the moment, I'm 95% sure I've got the right values, but it is hard to find some official, credible or multiple independant sources on this.

            At the moment, I have selected replacements based on the following list of values:

            3 x 470uF 10VDC
            3 x 4.7uF 35VDC
            4 x 47uF 50VDC
            8 x 22uF 6.3 VDC
            1 x 220uF 6.3VDC
            5 x 100uF 6.3VDC

            Which...
            06-21-2023, 12:38 AM
          • TomGJ
            Genelec 8020C Bad capacitor
            by TomGJ
            Hi All, So I have two Genelec 8020Cs that are about 10 years old, one of them stopped switching on. I took it apart, fuse was blown, and I've traced the short to one of the two large capacitors on the circuit board.

            Now from looking at the Capacitors, they seem to be from Samwha's SD Series with the following specs: 3300uf, 35v, 85C, 25 x 16 mm Radial.

            The problem is, I can't find any capacitor from Samwha's SD Datasheet that matches these specs. The closest is 3300uf, 35v, 85c but 31.5 x 16mm, with a max ripple current of 2.5A. I'm guessing the 25mm is custom made for...
            11-02-2024, 07:45 AM
          • ssl6
            MSI K7T266 Pro (Ver. 1.0)
            by ssl6
            Hey Everyone,

            Long time lurker, but I think this is my first time posting.

            Just looking for some assistance on identifying some suitable replacement capacitors for an MSI K7T266 Pro (Ver. 1.0). I just got my hands on two of them actually, both working but one has some visibly bulging capacitors and the other has a few that I can't tell for sure if they're bulging because it's faint at best if they are.

            I'll be honest I don't fully understand much on capacitor spec sheets beyond voltage and capacitance but I can solder like nobodies business so I've...
            11-09-2023, 01:00 PM
          • badcap111
            How to read inductor specs?
            by badcap111
            I have a broken samsung galaxy s10 with missing inductor. I want to replace the missing inductor and I have found some vendors. But I don't understand how to read the specifications of the inductor. The specs are:

            INDUCTOR-SMD;470NH,20%,2520,T0.8,0.029OH

            I understand that the inductor is 470 nH with 20% margin, and the size is 2520 or 1008 (imperial measure), but what do T0.8,0.0290OH mean? I can't find any explanation on the web.
            09-12-2023, 01:25 PM
          • Loading...
          • No more items.
          Working...