How reputable is TheCapKing?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Frank Jr.
    New Member
    • May 2011
    • 4

    #41
    Re: How reputable is TheCapKing?

    Originally posted by Topcat
    Thanks for leeching tech information from here, yet buying from a competitor....

    As for the Cap King, well, that's a very strange tale indeed. If you read this thread, you see that I didn't post anything negative....that would be quite unprofessional even if he gave me reason to (which he hasn't)....other than some possible comments on another forum, which were never proven to have been posted by him. I have no qualms with Troy (the cap king) in any way. As strange as this may sound, I consider him a friend. We've bailed eachother out of some supply scrapes many times. We pass the time of day usually a couple times a week. Go figure. If someone has a legit gripe with him, I'm sure he'll work to get it straight, as would I if someone had a gripe with me. Compared to the greater evils of competitors, they would devour both the cap king and I in one gulp if they set their mind to it......
    When I discovered the bad caps on my mothers computer I was not aware of his site nor yours. As I stated earlier I have not practiced in my field in a long time. I browsed the internet and found his site first and then and only then did I purchased the caps from him. His link to here is how I discovered your site. I really don't like being referred to as a leech or leeching information from here as you put it. All I have done is express an honest opinion based on my limited exposure to both sites. Which may be or not be correct. I was wondering when someone was going to make derogatory comment(s) directed toward me just because I expressed a dissenting opinion. I did not expect it from you though. I didn't appreciate the dunce smiley either. Very disappointing.
    You do have a really nice site here and I wish you well.

    Comment

    • PCBONEZ
      Grumpy Old Fart
      • Aug 2005
      • 10661
      • USA

      #42
      Re: How reputable is TheCapKing?

      Originally posted by Frank Jr.
      When I discovered the bad caps on my mothers computer I was not aware of his site nor yours. As I stated earlier I have not practiced in my field in a long time. I browsed the internet and found his site first and then and only then did I purchased the caps from him. His link to here is how I discovered your site. I really don't like being referred to as a leech or leeching information from here as you put it. All I have done is express an honest opinion based on my limited exposure to both sites. Which may be or not be correct. I was wondering when someone was going to make derogatory comment(s) directed toward me just because I expressed a dissenting opinion. I did not expect it from you though. I didn't appreciate the dunce smiley either. Very disappointing.
      You do have a really nice site here and I wish you well.
      Do you use a shotgun for a fly swatter too?

      The poke at you was meant to be jovial, not an insult.

      If your skin it THAT thin how do you keep all the gooey parts from falling out?

      .
      Mann-Made Global Warming.
      - We should be more concerned about the Intellectual Climate.

      -
      Be who you are and say what you feel, because those who mind don't matter and those who matter don't mind.

      - Dr Seuss
      -
      You can teach a man to fish and feed him for life, but if he can't handle sushi you must also teach him to cook.
      -

      Comment

      • c_hegge
        Badcaps Legend
        • Sep 2009
        • 5219
        • Australia

        #43
        Re: How reputable is TheCapKing?

        You know what I see coming?

        I love putting bad caps and flat batteries in fire and watching them explode!!

        No wonder it doesn't work! You installed the jumper wires backwards

        Main PC: Core i7 3770K 3.5GHz, Gigabyte GA-Z77M-D3H-MVP, 8GB Kingston HyperX DDR3 1600, 240GB Intel 335 Series SSD, 750GB WD HDD, Sony Optiarc DVD RW, Palit nVidia GTX660 Ti, CoolerMaster N200 Case, Delta DPS-600MB 600W PSU, Hauppauge TV Tuner, Windows 7 Home Premium

        Office PC: HP ProLiant ML150 G3, 2x Xeon E5335 2GHz, 4GB DDR2 RAM, 120GB Intel 530 SSD, 2x 250GB HDD, 2x 450GB 15K SAS HDD in RAID 1, 1x 2TB HDD, nVidia 8400GS, Delta DPS-650BB 650W PSU, Windows 7 Pro

        Comment

        • Topcat
          The Boss Stooge
          • Oct 2003
          • 16955
          • United States

          #44
          Re: How reputable is TheCapKing?

          Originally posted by PCBONEZ
          Do you use a shotgun for a fly swatter too?

          The poke at you was meant to be jovial, not an insult.

          If your skin it THAT thin how do you keep all the gooey parts from falling out?

          .
          this.
          <--- Badcaps.net Founder

          Badcaps.net Services:

          Motherboard Repair Services

          ----------------------------------------------
          Badcaps.net Forum Members Folding Team
          http://folding.stanford.edu/
          Team : 49813
          Join in!!
          Team Stats

          Comment

          • halaster79
            Member
            • Jul 2016
            • 39
            • usa

            #45
            Re: How reputable is TheCapKing?

            i think TheCapKing site shut down, what happened?

            Comment

            • Behemot
              Badcaps Legend
              • Dec 2009
              • 4845
              • CZ

              #46
              Re: How reputable is TheCapKing?

              Went out of byz.

              Whaddaya need?
              Less jewellery, more gold into electrotech industry! Half of the computer problems is caused by bad contacts

              Exclusive caps, meters and more!
              Hardware Insights - power supply reviews and more!

              Comment

              • Topcat
                The Boss Stooge
                • Oct 2003
                • 16955
                • United States

                #47
                Re: How reputable is TheCapKing?

                Originally posted by halaster79
                i think TheCapKing site shut down, what happened?
                He's been gone for a while. Moved onto bigger & better things. What are you after?
                <--- Badcaps.net Founder

                Badcaps.net Services:

                Motherboard Repair Services

                ----------------------------------------------
                Badcaps.net Forum Members Folding Team
                http://folding.stanford.edu/
                Team : 49813
                Join in!!
                Team Stats

                Comment

                • halaster79
                  Member
                  • Jul 2016
                  • 39
                  • usa

                  #48
                  Re: How reputable is TheCapKing?

                  i was web-surfing. I used to buy Rubicon MCZ caps from them a year or 2 ago. But I don't need any caps right now

                  Comment

                  • Behemot
                    Badcaps Legend
                    • Dec 2009
                    • 4845
                    • CZ

                    #49
                    Re: How reputable is TheCapKing?

                    I plan on sourcing Suncon WG, that's about what you can get now.
                    Less jewellery, more gold into electrotech industry! Half of the computer problems is caused by bad contacts

                    Exclusive caps, meters and more!
                    Hardware Insights - power supply reviews and more!

                    Comment

                    • halaster79
                      Member
                      • Jul 2016
                      • 39
                      • usa

                      #50
                      Re: How reputable is TheCapKing?

                      is B+D ENTERPRISES trustable for suncon wg?

                      Comment

                      • mockingbird
                        Badcaps Legend
                        • Dec 2008
                        • 5484
                        • -

                        #51
                        Re: How reputable is TheCapKing?

                        Originally posted by halaster79
                        is B+D ENTERPRISES trustable for suncon wg?
                        Yes. It's run by Bud Funari and he can be trusted as a reliable distributor.

                        Comment

                        Related Topics

                        Collapse

                        • DynaxSC
                          Need real mobo dump of BIOS v402 for ASUS PRIME Z590-A - stock image no help
                          by DynaxSC
                          Hi,

                          I have a serious problem to program the Z590 chipset SRAM with a Management Engine after replacing the chipset.
                          The new chipset is factory new and is not containing any Management Engine. Any attempts to program it into the chipset under Windows ends with a failure (eg. Error 20: Management Engine Device not present, or something similar).
                          Due to the lack of the ME several ports on the board, including all M.2 ports aren't working, booting OS works only on USB. So it's now other way, as to program the chipset with a ME.

                          Usually on ASUS boards it worked...
                          06-14-2024, 03:49 PM
                        • DynaxSC
                          MSI PRO B660M-G DDR4 - real bios dump from board needed (no stock bios)
                          by DynaxSC
                          Hi, I have an MSI PRO B660M-G DDR4 board with damaged BIOS and i need a bios dump from a real board, along with MAC, UUID and Serial Number info (eg. a BIOS screenshot and pictures from the board stickers).

                          I need to reconstruct the bios on my board, based on another bios image form a real board - meaning a bios image containing MAC address, UUID and Serial number. A stock BIOS is not suffiecient, as it is impossible to discover where the MAC, UUID and SerialNumber are stored. Tried with a similar board, but there are too much differences, and the stock BIOS is missing a lot of...
                          11-17-2023, 10:56 AM
                        • AkaBukai
                          Is it okay to flash stock bios onto the motherboard's BIOS?
                          by AkaBukai
                          Hi there,
                          I have a 14" Lenovo Laptop (Flex 5 14ALC05) which has a boot issue.
                          The little LED on the power button is flashing slowly and nothing happen.
                          This unit do not have any BIOS button cell battery so I tried many times draining the power but it is still not powering on.

                          So I decided to flash the BIOS using a cheap programmer.
                          And I was successfully able to read the content (exactly 16MB file) which BTW is a WINBOND 74m12jwsiq (according to the package inscription - but detected as W25Q128FW in the software - IMSProg on Linux)

                          I also...
                          12-19-2024, 12:15 PM
                        • ignacio.ino27
                          (BIOS) Asus X541UVK Rev 2.0. Stock ME REGION
                          by ignacio.ino27
                          I share with us this binnary file that i have edited the ME Region (from original dump version to stock 11.6.0.1126).

                          It is "stock" region and working.

                          BIOS: X541UAK.306
                          MOTHERBOAD: X541UVK Rev. 2.0
                          CPU: Intel Core i3 7100U Kaby-Lake R

                          ║ Family │ CSE ME ║
                          ╟───────────────────────────────────────...
                          06-08-2021, 05:39 PM
                        • badcap111
                          How to read inductor specs?
                          by badcap111
                          I have a broken samsung galaxy s10 with missing inductor. I want to replace the missing inductor and I have found some vendors. But I don't understand how to read the specifications of the inductor. The specs are:

                          INDUCTOR-SMD;470NH,20%,2520,T0.8,0.029OH

                          I understand that the inductor is 470 nH with 20% margin, and the size is 2520 or 1008 (imperial measure), but what do T0.8,0.0290OH mean? I can't find any explanation on the web.
                          09-12-2023, 01:25 PM
                        • Loading...
                        • No more items.
                        Working...