Hi guys,
I bought this computer display. It was not working but I can't find why it's not working. I don't even get a blue/orange light.
Fuse is OK, it reads 1,2 ohms. I fully recapped the power board. Voltages on the cable that goes to the logic board seem to be OK and stable. I resoldered the whole board just in case.
I took the mosfet out of the board. It has written "A 2761I 826390". I tested it and I got no resistance or continuity, doesn't matter where I put the probes.
Any ideas?
Thanks!
I bought this computer display. It was not working but I can't find why it's not working. I don't even get a blue/orange light.
Fuse is OK, it reads 1,2 ohms. I fully recapped the power board. Voltages on the cable that goes to the logic board seem to be OK and stable. I resoldered the whole board just in case.
I took the mosfet out of the board. It has written "A 2761I 826390". I tested it and I got no resistance or continuity, doesn't matter where I put the probes.
Any ideas?
Thanks!
Comment