I have a techwood 50ao11uhda It has a child lock on the password has been forgotten that I can't figure out how to remove before I go buy a new main board I was wondering if anyone had a dump of the eeprom for this so I could flash it and save some moneys thankyou joshua

Hi,
an old friend of mine wants me to repair this old (not worth it) model. Found standby only. Changed couple of swallen caps 1000uf 16v, 25v in power supply and set is on.
however noticed many digital pixel noise probably originating from OSD. When osd gies off they stay.
Am thinking a couple of caps near cpu.might be the culprit. But cannot afford much time on it anymore as this is almost a free repair.

Any ideas welcome. Pics attached.

Hi there everyone

I was wondering if I could get a little help. Back in November my wife and I bought a Techwood 55AO9UHD (running on the Vestel mb230 board) and it's been brilliant... except for one thing. We're unable to get the phone remote app to work.

I've contacted Techwood's Support line and they have kindly provided me with a copy of the firmware that was meant to fix the issue... of course it did not. The Virtual Remote is turned on in the TV setting but it's not really making a difference.

I also run a Home Assistant Server and though I'd...

In power cycling mode.

Powers on by itself when switched on at the mains socket.
Backlights come on, standby light flashes 26 times then shuts off and cycles again.

No sounds whatsoever i.e boot melody etc...

Swapped power board for one I had lying around, same result. So doubt power board the issue unless I have a faulty spare board too but voltages are present and correct to the main board.

Backlights, an array of 11 strips, 10 x 7led and 1 x 8led. Led tester shows 106v on each side, which sounds about right for half the leds (39). So...

Hi Guys, a friend is dropping in a Techwood TV, Model 32hdled, totally dead apart from a constantly flashing red led when powered up, anybody any ideas prior to me getting my hands on it?, tanx in advance