New Members
Please consider donating to this site if it has helped you. We rely on these donations.
Please also introduce yourself here Introduce yourself here.
And finally, Read the Forum rules here.
hello everybody, here is folini from switzerland. as a biginner of this field i just want to know some infos regarding this model. basically i have learned many things from here and mainly i am interested in removing bios password of HP elitebook laptops. now i am bit stucked with this lenovo.before i upload the locked bin file here i want to know which chip do i have to connect my tool and read to remove the bios password?
laptop model: lenovo thinkpad p1 gen 1
compliance id: TP00099A
TYP 20MD-S0HB00
S/N R9-0TN62H 19/03
MB LPM-1
17870-2
448.0DY04.0021...
[Request] Lenovo Legion Go (8APU1) Schematic and Boardview
Hello everyone,
For a project of mine, I need the pinout for the EDP display connector since these aren't universal. It would be nice to have the pinout of the other board connectors as well, so does anyone have any schematics/boardview files of the 8APU1 motherboard that's in the Lenovo Legion Go?
Hi Guys.
Here I have a 4070ti with some issues.
When powered on the led lights which power on (where the zotac logo is) flash green 3 times. Once it has flashed green 3 times it does not post.
Just to mention I have not worked on many 40x cards before therefore some of my assumptions could be wrong. If you do happen to find that my analysis is wrong or I have missed something feel free to comment.
Additionally, I do not have a schematic for this exact card model so if anyone is willing to post the schematic it would be much appreciated.
Hello!
New here. I just bought a broken Focusrite to begin my journey in repairing stuff.
I would like the schematic for the Focusrite Scarlett 2i2 3rd Gen audio interface.
Thanks in advance if anyone answers!
Request for BoardView for ASUS TUF Gaming A15 (DA0NJM8C0 Rev C)
Hi all,
I'm looking for the BoardView file for an ASUS TUF Gaming A15 motherboard, specifically DA0NJM8C0 Rev C (Quanta NJI). My repair technician has identified a power regulation issue, and we need the BoardView to trace the power lines accurately....
Hi guys, I'm working on a MSI Ventus RTX 4080 16G. The GPU has 12v, 5v, however what I assume is the 1.8v rail has 1.1v and what I assume to be PEX is 0v. As you may have guessed already there is no Vmem and no Vcore.
I have looked around in related forum posts for a schematic so Much appreciated if anyone can share a Broadview schematic.
Please share the schematic or boardview files for this Mainbord. Got a fried chip/device on the mainboard, and would like to fix it, and check the other both near the fried chip too.
I need to know the model and type of this fried device. Its maybe an capacitor, but am not sure.
Keyboard backlight too bright - Asus Zenbook S16 / UM5606
Hi,
I have a new Asus Zenbook S16, Model UM5606. Unfortunately, the keyboard backlight is too bright, even on the lowest setting. I have explored several ways now:
- kindly ask Asus for an adjustment - they basically told me to STFU and get lost It is not possible, they say. Of course.
- tint the keycaps from behind - I have already tried that - it is kind of a last resort
- try to find out, how it is done, look at schematics - this is, where we are at.
- maybe get the BIOS modified somehow? This would be the best option but I do not know a lot about...
My Lenovo L13 Gen 2 was working perfectly until two days a when it refused to boot after previous used.
When I press the power button, the power led will lit and goes off immediately with the CPU fan concomitantly spinning for few seconds and then stop.
The reset button did not help to resolve the issue. I have also performed hard reset by:
1. Disconnected the battery
2. Unplug the adapter
3. Hold down the power button for 15sec. Then increased to 30sec, 45sec and finally to 1m.
4. Then plug the adapter.
Looking for MSI MS16P61 schematic and boardwiew, I made a short circuit trying to replace the screen while the notebook was still turned on, and now it doesn't turn on
Leave a comment: