Are these 2 chips both compatible (GR8313) vs (HY510N)??

Collapse
This topic has been answered.
X
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Francesc V.
    Tempus fugit
    • Nov 2022
    • 231
    • Catalonia
    #1

    Are these 2 chips both compatible (GR8313) vs (HY510N)??

    Hi:

    I have a SMPS that has GR8313 as power supply supervisor chip. I have already ordered these chips, but today doing housekeeping and doing some catalogue of all "shit", I realised that HY510N chip which I already have, has the same pinout and I would say will do the job.

    Do you think that I could use HY510N instead of GR8313 for trying to repair the SMPS?

    Attaching both data sheets for a fast checking.

    Thanks in advance.
    Francesc.

    Attached Files
    Tags: None
    • Answer selected by Francesc V. at 03-06-2025, 08:14 AM.
      stj
      Great Sage 齊天大聖
      • Dec 2009
      • 31086
      • Albion
      HY510 doesnt detect 12v under-voltage.
      there may be other differences
        • Selected Answer

        Comment

        • stj
          Great Sage 齊天大聖
          • Dec 2009
          • 31086
          • Albion
          #2
          HY510 doesnt detect 12v under-voltage.
          there may be other differences
            • Selected Answer

            Comment

            • Francesc V.
              Tempus fugit
              • Nov 2022
              • 231
              • Catalonia
              #3
              Thanks stj.

                Comment

                Previous template Next

                Related Topics

                Collapse
                • ugamazing
                  Best place to source RAM chips? 8GB 820-00850 boards to 16GB or 32GB
                  by ugamazing
                  I'm looking to upgrade several 8GB 820-00850 boards to 16GB or 32GB for personal use. I am curious what the best practice and process is for sourcing new replacement chips, and what vendor(s) you guys prefer? Another question is, how do I find compatible chips and their corresponding part/model numbers? For example, in the 820-00850 schematic, the DDR chip U2600 model listed (EDFB232A1MA) corresponds to 1x32GB chip. Of course, I would need 4x8GB chips to replace the 4x2GB chips currently on the board. How do I find compatible 8GB chips? Is it as simple as searching "BGA178 8GB 2133"...
                  08-31-2022, 07:34 AM
                • feherhollo
                  WSON8 NEW Bios Chips READ, ERROR, ETC.
                  by feherhollo
                  Hi,
                  I asking for help on some new WSON8 256MB chips. Please share your experience. I faced error on some new chips on read, erase, write with different programmers. These new chips are not exist in any programmers database. (GD25B256D, XM25RH256, W25Q256JV so on.)
                  I'm using RT809F V.5.0, EZP2023 Pro, CH341A Green

                  For the exact experience with GD25B256DYIG is RT809F erase the chip under 33sec. This kind of 256MB chip normal erase time is 70-120sec so I think not all the partitions are erased. If I do blank check or reread the buffer says FFFFFF but when I write the correct...
                  11-26-2023, 09:33 AM
                • dkneyle
                  Onkyo DX-V500 Laser Disc Player - weird SMPS fault
                  by dkneyle
                  This relic from a technology path that came to a dead end (but still has historical interest) was brought in with a dead SMPS, which is based around a MK1210 device. I got it going after a battle. It seems to have a strange design - if it's not getting feedback that the secondary is OK it cause the big FET to go into full conduction and overloads resulting in a blown fuse at best or something worse! I'm using a Dim Bulb Tester (70W/230V) which thankfully has saved the day a number of times whilst repairing.

                  Now, it loads a CD OK. The motor voltage output (which is built onto the SMPS...
                  02-01-2022, 02:08 AM
                • shamsudeen
                  Hi, Can we use SMPS Bench Power Supply for Laptop troubleshooting?
                  by shamsudeen
                  Hi all, I just need to know that, can i use SMPS type power supply to test and short circuit detection on a laptop motherboard?
                  I saw 95% of repair guys are using only Linear bench power supply. linear bench power supply is pricy, thats why i planned to get one SMPS supply.

                  i know that in linear power supply the noise will be very low comparing to SMPS supply....
                  07-19-2025, 07:14 AM
                • Prott
                  [RoG Ally] Fault in one of the onboard RAM chips. Any way to diagnose which?
                  by Prott
                  Hello dear badcappers!

                  The title pretty much says it all - do you, please, know if there's any way to troubleshoot which of the integrated RAM chips (LPDDR5X in this case) is faulty?

                  Backstory:
                  After replacing the 4 onboard (soldered) memory chips on a RoG Ally (4x4 GB to 4x8 GB) it got stuck on the RoG logo. I assume one of the chips is either not soldered properly or faulty. However after reflowing and replacing bunch of them I am still stuck at the same place.

                  If there is a way to narrow down which memory module is faulty it would make my life much...
                  06-03-2024, 12:05 PM
                • Loading...
                • No more items.
                Working...