ERRA
Senior Member
Last Activity: 01-10-2026, 03:57 PM
Joined: 09-08-2025
Location: Agadir
-
Something wrong from your side!! that file should work as it's an official file from support! You're using the clip to program the bios chip i guess! right?? -
TRY...Leave a comment:
-
TRYB THIS FILE, AND REPORT BACK THE RESULTS...Leave a comment:
-
That occurs after bios unlock ? if yes the just 'Alt-F' and set the service tag then save, then restart 2 or three times and you're done!...Leave a comment:
-
try...Leave a comment:
-
that tag can be done exactly as 8FC8 case...Leave a comment:
-
TRY...Leave a comment:
-
Upload your dump, if you have two bios chips there you should dump them both!...Leave a comment:
-
Try one of these, better to use the official file, next time give full info of the machine!...Leave a comment:
-
The system was working with it, i can accept that! But have you flashed that file back to the chip and pc worked ??...Leave a comment:
-
try this one...Leave a comment:
-
try...Leave a comment:
-
The password is :
Admin Password: 2024
try it
if not working use the attached patch...Leave a comment:
-
The old file you uploaded before this one is corrupted!
Now try this patch, good luck bro...Leave a comment:
-
You should have the 3VS , no need to waste time programming the the EC if that 3vs is missing...Leave a comment:
-
TRY THIS...Leave a comment:
-
TRY...Leave a comment:
-
Do you get 3V on that vcc line when power button is pressed??...Leave a comment:
-
Two files to try:
Note: BR= BIOS Region....Leave a comment:
No activity results to display
Leave a comment: