Hello, I have been following the forum for some time. I found a lot of useful information. I will also post something from myself. Greetings
New Members - please post your introductions here
Collapse
This is a sticky topic.
X
X
-
Hi everyone,
My name is Helder, and I've been repairing computers for 21 years. I specialize in hardware repairs, software solutions, and advanced diagnostics.
I joined this forum to share knowledge, learn from others, and exchange ideas about challenging repair cases.
Feel free to reach out if you need help or want to discuss anything tech-related!
Best regards,
Comment
-
hello, thanks for accepting me. I'm bruno, administrator from france, I have some servers like HP GEN8,Z4 G4, Z420 with esx inside
regards
brunoComment
-
Hi,
I am new here and also a new Techiman in computer field. Please support me for some diagram and board views. I will also return anything I have.Comment
-
Hello everyone! My name is Misha, I am from Ukraine. Since childhood I am fond of technology and repair - I started at the age of 10, and now I am already 27. Although I don't consider myself a professional, it's more of a hobby for me, I enjoy understanding computers, electronics and other equipment. Sometimes cleaning, fixing or even restoring things that don't seem to work anymore.
Glad to join this forum! Here I plan to share my knowledge, findings and experience, as well as learn something new from you, colleagues. After all, it's always nice to learn from people who are also passionate about what they do.
Thank you for taking the time to read my message. I wish you all a great mood and success in your business! 😊Comment
-
-
From Costa.
I used to dismantle my Dads car stereos since the early 80's...then started to built things using those motors and batteries, and right now I own a Small Tech repair firm since 1996. I was about to abandon all this but I really enjoy fixing a computer(Mac basically) or electronics.
Thank you guys all your sharing your knowledge and support.Comment
-
Hi
my name is aymanochko, I’m a project manager but I love repairing. It’s my hobbie. I found a lot of useful information in the forum and I wish I will help someone in this forum. Thank you for your welcome.Comment
-
hello im just a redkneck who just up untill about 2 or 2 and a half years ago didnt even know what usb stood for. never had my own computer aside for college briefly. typed with one finger lol although my grammer still sucks and i cant spell for $h&* i can type i feel at least efficiently enough to get by now 2-3 years later and feel in a short time i went from no knowledge or interest to now to today where i found this website because i have my own electronic work station at home i have had jobs working on MRI coils as a electronic repair tech and am currently needing a bios.bin file for a project i am working on . a 1500 dollar laptop a dell precision 3560. i am installing a new windond chip so i have no bios dump i can provide is there anyway to go from here >?
also My name is Logan im 31 and live in omaha NEComment
-
Its been quite a while I haven’t attempted any electronics repairs but I love learning and a good challenge!Comment
-
Self taught repair tech. Arcade games, Deloreans, skeeball and electronics others have long since abandoned.Comment
Related Topics
Collapse
-
by fredyjbiplease help friends thinkpad T470 board CT470 series NM-A931 error post "bottom cover tamper detection error"
I've already
flashed the bios clean me and updated from the Lenovo site, then removed the switch and immediately jumped the S3 from pins 1 to 4, 2 to 3 but the problem remained the same, thank you1 Photo -
by fredyjbiplease help friends, I have 3 T490 units with the same case, the USB type C is completely dead, showing 20v 0 amp, loss of voltage VINT20_IN resistance to ground is fine, thank you
I think the problem is that I lost the voltage at PQ0008 pon 1 -PWRSHUTDOWN which should have been high which was picked up by R9512 VCC3SW, thank you very much for your help
PF0002 20v
PQ0005
pin 5 20v
pin 1.2.3 19.8v
pin 4 19.8
resistance
source & drain 2,4 m
source & gate 100k
PQ0006
pin 1.2.3 19.8v
pin 4 19.8v... -
by fredyjbiplease help friends x1 yoga 7th no display beep melody thank you...
-
Channel: BIOS Requests ONLY!
-
-
by fredyjbiplease help friends clean me bios x1 yoga 7th no display melody beep, thank you
-
Channel: BIOS Requests ONLY!
-
-
by fredyjbiPlease help friends, thinkpad t480 nm-b501 is dead, help me fix it, thank you
usb meter 20v 0.00 amp, after I took the VSYS measurement the drop was only `9.2v which should have been 10.2v I measured from a normal matherboard machine, the VSYS path resistance to ground diode mode is 1900 thank you
LINK to Schematic -> https://www.badcaps.net/forum/troubl...b501-schematic - Loading...
- No more items.
Comment