am Demiii based in E.A. deeply glad to be part of this community hopping to add value
New Members - please post your introductions here
Collapse
This is a sticky topic.
X
X
-
Hi,
New to the forum. My training is medical and scientific, which means I ended up doing a lot of reading to learn my craft. Always been interested in electronics, but the internet and youtube has been the catalyst for my midlife crisis. Ended up fixing a lot of things over the last few years, mainly audio amplifiers and tuners, but also the occasional shredder.
Came to this forum with a problem with and LED TV cycling (Samsung Power Supply BN44-00622B), and was reading through the threads covering the same model. Will post up the white surrender flag when I have absorbed what has already been written.
Cheers all !
SimonComment
-
hello everyone
My name is Tony, I'm 35 years old and I'm a handyman of all kinds.
I was doing some research on how to reset a bios password when I came across this forum which looks very cool.
I hope to be able to learn new things and who knows, share my knowledgeComment
-
Hello,
Ummm... Not alot to say except im a collector of used electronics and i dabble in the hardware mods a bit. I collect retro gaming hardware and i work 12 to 16 hours a day in the gas/oil industry.Comment
-
Hi everyone! I'm new here and really excited to be part of this community. I'm very interested in technology, software, and everything related to it, and I hope to both learn new things and share some of my own knowledge here. It's always great to connect with like-minded people and discover new perspectives. Looking forward to many interesting discussions and helpful tips!Comment
-
Hi from Sweden,
been tinkering with computers and electronics almost all me life.
Doing electronics repairs semiprofessional for a couple of years now beside my regular work as an electricianComment
-
Hello I am a farther of two in my late 30's for the main part I am a IT Systems designer focusing on operational support systems for Mobile Networks such as element managers. Previously I was a telecoms tech looking after landline switches P2P microwave and PDH, SDH(SONET), IP and other optical transmission systemsComment
-
Hello everyone.Glad to have found what looks like a great, knowledgeable forum.I just recently went back to college to finish my pen testing and ethical hacking degree. Hope all is well with everyone and thanks having me.😎Comment
-
-
Related Topics
Collapse
-
by fredyjbiplease help friends thinkpad T470 board CT470 series NM-A931 error post "bottom cover tamper detection error"
I've already
flashed the bios clean me and updated from the Lenovo site, then removed the switch and immediately jumped the S3 from pins 1 to 4, 2 to 3 but the problem remained the same, thank you1 Photo -
by fredyjbiplease help friends, I have 3 T490 units with the same case, the USB type C is completely dead, showing 20v 0 amp, loss of voltage VINT20_IN resistance to ground is fine, thank you
I think the problem is that I lost the voltage at PQ0008 pon 1 -PWRSHUTDOWN which should have been high which was picked up by R9512 VCC3SW, thank you very much for your help
PF0002 20v
PQ0005
pin 5 20v
pin 1.2.3 19.8v
pin 4 19.8
resistance
source & drain 2,4 m
source & gate 100k
PQ0006
pin 1.2.3 19.8v
pin 4 19.8v... -
by fredyjbiplease help friends x1 yoga 7th no display beep melody thank you...
-
Channel: BIOS Requests ONLY!
-
-
by fredyjbiplease help friends clean me bios x1 yoga 7th no display melody beep, thank you
-
Channel: BIOS Requests ONLY!
-
-
by fredyjbiPlease help friends, thinkpad t480 nm-b501 is dead, help me fix it, thank you
usb meter 20v 0.00 amp, after I took the VSYS measurement the drop was only `9.2v which should have been 10.2v I measured from a normal matherboard machine, the VSYS path resistance to ground diode mode is 1900 thank you
LINK to Schematic -> https://www.badcaps.net/forum/troubl...b501-schematic - Loading...
- No more items.
Comment