New Members - please post your introductions here
Collapse
This is a sticky topic.
X
X
-
Hello, BADCAPS surfers,
I have a passion for any kind of machine. When they work, 🤩 when they stop working, 🤔I try hard to fix them. Tham I love to fix!
Of course, I have some education and experience, too.
My work is on Renewables.
Nice Forum you have here
And I'm Portuguese
Thank's
Comment
-
-
Hey guys, I own my own company as a "builder". I find the word engineer limiting and "hacker" leaves a bad taste although that's what most of us are. People don't understand what that means. It's not just maliciously change computer code or dropping virus. It's simply changing something to get a different "off label" usage out of it. Anyways, I hope that helps you explain who I am.Comment
-
Hola buenas noches me presento en este foro me uni porque vi que tienen muchos conocimientos y quiero aprenderComment
-
-
Hello everyone! Thanks for allowing me to join your community! I’ve always had a passion for electronics, which drove my career up until about 12yrs ago when I made an industry change to big oil. But I miss my bench and notebook, so I kept busy tinkering and repairing stuff. I’m slowly gathering my tools and building what I need to safely continue to play on the bench, mainly audio related, SMPS, and the occasional microcontroller projects. I look forward to meeting some of you at a local electronics swap meet (W6TRW is a local spot) or just chatting online!😁
Regards,
JaimeComment
-
Hi, My name is Richard. I'm shortly to be 70 years old. I've been interested in electronics and computers since I started my apprenticeship for BT in 1972. I like to try to repair old computers and build my own computer with varying degrees of success. I'm only an interested amateur though with no formal training so access to a forum like this will give me loads of information to continue my learning curve.Comment
-
hi my name is Rayan . i live in Helsinki . im student and im designing board so nice to meet you allComment
-
Hello
I live in South Korea
I am a gamer who likes computer parts
I want cheap computer parts, so I need to repair broken parts
This place has a lot of helpful information for me
Thank you to everyone who shares information for othersLast edited by holdmeagain; 11-02-2024, 07:19 AM.Comment
Related Topics
Collapse
-
by fredyjbiplease help friends thinkpad T470 board CT470 series NM-A931 error post "bottom cover tamper detection error"
I've already
flashed the bios clean me and updated from the Lenovo site, then removed the switch and immediately jumped the S3 from pins 1 to 4, 2 to 3 but the problem remained the same, thank you1 Photo -
by fredyjbiplease help friends, I have 3 T490 units with the same case, the USB type C is completely dead, showing 20v 0 amp, loss of voltage VINT20_IN resistance to ground is fine, thank you
I think the problem is that I lost the voltage at PQ0008 pon 1 -PWRSHUTDOWN which should have been high which was picked up by R9512 VCC3SW, thank you very much for your help
PF0002 20v
PQ0005
pin 5 20v
pin 1.2.3 19.8v
pin 4 19.8
resistance
source & drain 2,4 m
source & gate 100k
PQ0006
pin 1.2.3 19.8v
pin 4 19.8v... -
by fredyjbiplease help friends x1 yoga 7th no display beep melody thank you...
-
Channel: BIOS Requests ONLY!
-
-
by fredyjbiplease help friends clean me bios x1 yoga 7th no display melody beep, thank you
-
Channel: BIOS Requests ONLY!
-
-
by fredyjbiPlease help friends, thinkpad t480 nm-b501 is dead, help me fix it, thank you
usb meter 20v 0.00 amp, after I took the VSYS measurement the drop was only `9.2v which should have been 10.2v I measured from a normal matherboard machine, the VSYS path resistance to ground diode mode is 1900 thank you
LINK to Schematic -> https://www.badcaps.net/forum/troubl...b501-schematic - Loading...
- No more items.
Comment