A new technician base in ASIA still learning and willing to learn from the member of this group
New Members - please post your introductions here
Collapse
This is a sticky topic.
X
X
-
Dan Riti
living in UK
repairing Macs since about 10 years ago
is this forum require an account and login in?
If yes I can't seem to be able to find the login page/procedureComment
-
Hi all,
Sergiy from Ukraine. Software engineer, also like to mess with old PC and related stuff as my hobby.Comment
-
-
-
-
-
Hello,
im french young electronic tech, previously welder/construction diver. I was lucky enough to work in Australia and NZ few years but had an accident at work and had to go back to my country and find a new carreer path. During the healing process, repairing everything that is broken became an addiction and i love learning about electronics since. It's a really long road with lot of frustrations sometimes but it s the way i picked for the rest of my life and at least my back is safe now.. cheers !
Comment
-
Comment
-
Today, 08:11 PM
Hello folks,
I've been around the block with computers since the early 80's and I have had
motherboards recapped successfully at Badcaps in 2009 and 2016.
There are lots of smart minds here and I look forward to learning something new.
Currently, I have a locked Lenovo BIOS to address.
Last edited by seepink; 02-11-2024, 07:14 PM.-SeePink-Comment
-
Hey just your everyday Auto Glass installer that like to fix broke crap and learn things most people don't know,Comment
-
Hi just trying to fix my black screen / failed U8900 GPU vcore on my Mid-2012 MBP 15" retina by doing a reflow of the chip (if that's the real issue)Comment
-
Related Topics
Collapse
-
by fredyjbiplease help friends thinkpad T470 board CT470 series NM-A931 error post "bottom cover tamper detection error"
I've already
flashed the bios clean me and updated from the Lenovo site, then removed the switch and immediately jumped the S3 from pins 1 to 4, 2 to 3 but the problem remained the same, thank you1 Photo -
by fredyjbiplease help friends, I have 3 T490 units with the same case, the USB type C is completely dead, showing 20v 0 amp, loss of voltage VINT20_IN resistance to ground is fine, thank you
I think the problem is that I lost the voltage at PQ0008 pon 1 -PWRSHUTDOWN which should have been high which was picked up by R9512 VCC3SW, thank you very much for your help
PF0002 20v
PQ0005
pin 5 20v
pin 1.2.3 19.8v
pin 4 19.8
resistance
source & drain 2,4 m
source & gate 100k
PQ0006
pin 1.2.3 19.8v
pin 4 19.8v... -
by fredyjbiplease help friends x1 yoga 7th no display beep melody thank you...
-
Channel: BIOS Requests ONLY!
-
-
by fredyjbiplease help friends clean me bios x1 yoga 7th no display melody beep, thank you
-
Channel: BIOS Requests ONLY!
-
-
by fredyjbiPlease help friends, thinkpad t480 nm-b501 is dead, help me fix it, thank you
usb meter 20v 0.00 amp, after I took the VSYS measurement the drop was only `9.2v which should have been 10.2v I measured from a normal matherboard machine, the VSYS path resistance to ground diode mode is 1900 thank you
LINK to Schematic -> https://www.badcaps.net/forum/troubl...b501-schematic - Loading...
- No more items.
Comment