Re: New Members - please post your introductions here
Hey i'm new to the whole electrical world.. no training before hand. just researching and fixing what i can. mostly computers and tv's with a decent amount of success. i joined this site to expand my knowledge and help others.
Re: New Members - please post your introductions here
Hi guys, just decided to join your lovely forums.Hope you have fun here and also learn more about computer electronics and sharpen my electronic skills.
Re: New Members - please post your introductions here
Hello everyone,
i just want to say hello. I would like to modify my T470 Bios so that the external battery decharges first and only to 20% before the internal one begins to be used. I have downloaded some rom images here, because i do not own a spare T470 atm.
Re: New Members - please post your introductions here
Adding another member to your ranks. I am from Austin, TX. I am a software developer by trade, but a hardware tinkerer by hobby (and some times necessity). I enjoy fixing my hardware rather than dumping it in the trash. Keep the earth a little greener, while saving a little green.
Looking forward to expanding my dabbling from vintage computers and game console repair to TVs. (The TV's have become out of necessity... as of late)
Re: New Members - please post your introductions here
186 / 5.000
Resultados de tradução
Hello, I'm Vando Sander, I'm from the state of Paraná, Brazil. I've been a technician since 2008, working with desktops and notebooks. Now I want to specialize in electronic board recovery.
Re: New Members - please post your introductions here
Hello, Discovered this forum whilst looking to reset bios passwords for some laptops I have... I'm all about recycling and sustainable technology ... If we can keep it and use it as proper owners should then I'm happy.
Re: New Members - please post your introductions here
Hi, I am an electronic technician (retired), but I try to fix just about anything.
Amongst other things:
Repairer of most small electrical appliances for friends.
Railroad modeller, trying to invent a radio control system for an O scale locomotive.
Drone flyer, fitting extra LEDs so that I can still see the thing at a distance !
Re: New Members - please post your introductions here
Hello
I just wanted to introduce myself.
my name is alex and i come from germany i am an IT systems electronics technician and i like to tinker around with electronics.
i am 28 years old and have lived in germany since i was born.
Re: New Members - please post your introductions here
Originally posted by freaqlikeme
Hello
I just wanted to introduce myself.
my name is alex and i come from germany i am an IT systems electronics technician and i like to tinker around with electronics.
i am 28 years old and have lived in germany since i was born.
please help friends thinkpad T470 board CT470 series NM-A931 error post "bottom cover tamper detection error"
I've already
flashed the bios clean me and updated from the Lenovo site, then removed the switch and immediately jumped the S3 from pins 1 to 4, 2 to 3 but the problem remained the same, thank you
please help friends, I have 3 T490 units with the same case, the USB type C is completely dead, showing 20v 0 amp, loss of voltage VINT20_IN resistance to ground is fine, thank you
I think the problem is that I lost the voltage at PQ0008 pon 1 -PWRSHUTDOWN which should have been high which was picked up by R9512 VCC3SW, thank you very much for your help
Please help friends, thinkpad t480 nm-b501 is dead, help me fix it, thank you
usb meter 20v 0.00 amp, after I took the VSYS measurement the drop was only `9.2v which should have been 10.2v I measured from a normal matherboard machine, the VSYS path resistance to ground diode mode is 1900 thank you
Comment