Hello , I am a technician and content creator specializing in the field of game console modification and repair. My work and latest updates are documented on my active X.com profile.
Hello, my name is Massi, I am from the US and look forward to finding additional documentation and help for console board repair! I am currently adequate when it come to HDMI replacements but I am looking to expand my knowledge and skills.
I'm just new here exploring what i can trying to solder stuff and i got this broken gpu with only two resistor damage i think im still exploring and it just caught my interest to do something :/
Hi everyone, I’m Alekxys, and I’m a software engineer. I recently bought a second-hand laptop, only to find out that it has an Absolute Persistence Module. That’s how I ended up in this forum. Nice to meet you all!
Je suis handicapé avec peu de moyens.
Donc j'essaie de faire durer d'anciens ordinateurs (OS Linux).
Souvent je fais des erreurs et je passe énormément de temps pour réparer.
Dernièrement, sur un Lenovo T500, j'ai rentré un mot de passe utilisateur vierge sur HDD.
Depuis je ne peux plus modifier quoi que ce soit dans mon bios.
C'est en recherchant une solution que j'ai appris l'existence de www.badcaps.net
Merci, par avance à ceux qui font vivre ce Forum 👏.
Karamelmoue
Hi guys. I'm pretty new to the world of laptop repairs and refurbishment, but learning very fast. I look forward to learning, and later contributing to others as time goes by.
hey guys, managed to get my hands on a laptop with a gpu problem. tried taking it to a service yet the service man in my country prefer to "replace the board" .. (a rare board that hard to find and those that i found cost 1000 bucks!!) so i though i might get a boardview for the board and start on repairing it my self (or at least try) and see if i manage to do anything
please help friends thinkpad T470 board CT470 series NM-A931 error post "bottom cover tamper detection error"
I've already
flashed the bios clean me and updated from the Lenovo site, then removed the switch and immediately jumped the S3 from pins 1 to 4, 2 to 3 but the problem remained the same, thank you
please help friends, I have 3 T490 units with the same case, the USB type C is completely dead, showing 20v 0 amp, loss of voltage VINT20_IN resistance to ground is fine, thank you
I think the problem is that I lost the voltage at PQ0008 pon 1 -PWRSHUTDOWN which should have been high which was picked up by R9512 VCC3SW, thank you very much for your help
Please help friends, thinkpad t480 nm-b501 is dead, help me fix it, thank you
usb meter 20v 0.00 amp, after I took the VSYS measurement the drop was only `9.2v which should have been 10.2v I measured from a normal matherboard machine, the VSYS path resistance to ground diode mode is 1900 thank you
Comment