Ola meu nome e Ueliton sou tecnico de informatica a 10 anos prazer em fazer parte do grupo.
New Members - please post your introductions here
Collapse
This is a sticky topic.
X
X
-
-
I started to get interested in repairing computers and other electronics in the 2000s. At that time I had a PC with an Athlon 64 X2 processor and a Radeon X1800 XT video card. It all started with reinstalling Windows and Igor, then I started doing repairs and replacing components. Today I repair laptops in my free time as a hobby.Comment
-
-
Greetings. My work is David, and I'm a fan of old HiFi equipment.
I'm also an artist and regularly work with 3D printing and Arduino: www.disoluto.com
I'm currently battling it out with an old Tele_Master amplifier, but in this fight, I'm losing.
Thank you very much for your help, and I hope I can be of use to the community.Comment
-
Hi, I'm Dominik from Poland, I'm running my own small business in computer repairs. Looking forward to share expeirence.Comment
-
Comment
-
Hi all,
new here)
Learning linux and trying to learn hardware hacking at the same time.
Have a nice one!Comment
-
-
Hello everyone, it's been a while since I tried to repair my own PC, mainly because technology has changed so fast, it seems overwhelming, but I succeded in reparing a DELL PC and im trying to go ahead and repair my main LENOVO which sadly is out of warranty. I hope to learn from this community and help in anything I can.Comment
-
-
Related Topics
Collapse
-
by fredyjbiplease help friends thinkpad T470 board CT470 series NM-A931 error post "bottom cover tamper detection error"
I've already
flashed the bios clean me and updated from the Lenovo site, then removed the switch and immediately jumped the S3 from pins 1 to 4, 2 to 3 but the problem remained the same, thank you1 Photo -
by fredyjbiplease help friends, I have 3 T490 units with the same case, the USB type C is completely dead, showing 20v 0 amp, loss of voltage VINT20_IN resistance to ground is fine, thank you
I think the problem is that I lost the voltage at PQ0008 pon 1 -PWRSHUTDOWN which should have been high which was picked up by R9512 VCC3SW, thank you very much for your help
PF0002 20v
PQ0005
pin 5 20v
pin 1.2.3 19.8v
pin 4 19.8
resistance
source & drain 2,4 m
source & gate 100k
PQ0006
pin 1.2.3 19.8v
pin 4 19.8v... -
by fredyjbiplease help friends x1 yoga 7th no display beep melody thank you...
-
Channel: BIOS Requests ONLY!
-
-
by fredyjbiplease help friends clean me bios x1 yoga 7th no display melody beep, thank you
-
Channel: BIOS Requests ONLY!
-
-
by fredyjbiPlease help friends, thinkpad t480 nm-b501 is dead, help me fix it, thank you
usb meter 20v 0.00 amp, after I took the VSYS measurement the drop was only `9.2v which should have been 10.2v I measured from a normal matherboard machine, the VSYS path resistance to ground diode mode is 1900 thank you
LINK to Schematic -> https://www.badcaps.net/forum/troubl...b501-schematic - Loading...
- No more items.
Comment