Hi, my name is Igor. Llevo desde los tiempos del spectrum 48 trasteando con la informatica. Tengo muchas ganas de empezar a leer el contenido. SAludos
New Members - please post your introductions here
Collapse
This is a sticky topic.
X
X
-
Hello everyone. I'm Brazilian, graduated in Information Systems but I love electronics, engineering, and hardware. Since I was 13 I've been enthusiastic about fixing my own electronics and I love forums and other collaborative media. I recently discovered Badcaps and I'm looking forward to learning and collaborating a little with the members.Comment
-
-
-
Hi, i am admin hundreds of raspberry pi boards for one company of scooter sharing. Yes, zx spectrum was my childhood and assembler code for kids (joke, such book is a fiction), but now i am help people to repair electronic devices, in common with program parts with code and rare with hardwareComment
-
-
-
Hello!
My name is Silver, I am from Estonia. Trying to fix old electronic devices just for challenge and hobby. Never learned it at school, but interested from early age. Managed to fix sometimes 😎
My job is car electrician and diagnostic tech, so sometimes need to fix control units too.Comment
-
-
-
Related Topics
Collapse
-
by fredyjbiplease help friends thinkpad T470 board CT470 series NM-A931 error post "bottom cover tamper detection error"
I've already
flashed the bios clean me and updated from the Lenovo site, then removed the switch and immediately jumped the S3 from pins 1 to 4, 2 to 3 but the problem remained the same, thank you1 Photo -
by fredyjbiplease help friends, I have 3 T490 units with the same case, the USB type C is completely dead, showing 20v 0 amp, loss of voltage VINT20_IN resistance to ground is fine, thank you
I think the problem is that I lost the voltage at PQ0008 pon 1 -PWRSHUTDOWN which should have been high which was picked up by R9512 VCC3SW, thank you very much for your help
PF0002 20v
PQ0005
pin 5 20v
pin 1.2.3 19.8v
pin 4 19.8
resistance
source & drain 2,4 m
source & gate 100k
PQ0006
pin 1.2.3 19.8v
pin 4 19.8v... -
by fredyjbiplease help friends x1 yoga 7th no display beep melody thank you...
-
Channel: BIOS Requests ONLY!
-
-
by fredyjbiplease help friends clean me bios x1 yoga 7th no display melody beep, thank you
-
Channel: BIOS Requests ONLY!
-
-
by fredyjbiPlease help friends, thinkpad t480 nm-b501 is dead, help me fix it, thank you
usb meter 20v 0.00 amp, after I took the VSYS measurement the drop was only `9.2v which should have been 10.2v I measured from a normal matherboard machine, the VSYS path resistance to ground diode mode is 1900 thank you
LINK to Schematic -> https://www.badcaps.net/forum/troubl...b501-schematic - Loading...
- No more items.
Comment