No idea if I said hello before but here I am, a few years after I created the original account
New Members - please post your introductions here
Collapse
This is a sticky topic.
X
X
-
Comment
-
Hi all,
I'm excited to join this community and learn from the expertise here. I'm particularly interested in topics related to hardware modifications, BIOS updates, and optimizing systems for modern hardware compatibility.
Looking forward to contributing and gaining insights from everyone's experience. Thanks for having me!
Best regards,
​Alper ErdoğanComment
-
Bonjour à tous,
Je suis français, l'informatique m'attire et me passionne. J'ai entendu parlé de ce forum qui à ce qu'il parait pourrait me permettre de mieux comprendre certains chose concernant les cartes mères...
Merci à tous de m'avoir luComment
-
-
-
Hello everyone,
i am venturing into electronics and primarily to repair my own items. Hopefully to become proficient to help others.
The schematics are a godsend and very interesting and efficient to aid repairs. I hope my exploits could help other too.
My current setup;
Asus z10pe-ws d16, dual watercooled xeon e5-2699 v4, 512gb ecc ram, dual rtx3090 with 10tb sata drives.......primarily for 3d rendering and design
I have 2 faulty z9pe-ws d16 boards and an asus 797 pro board to investigate!Last edited by NEWBIEROB; 12-04-2024, 12:36 AM.Comment
Related Topics
Collapse
-
by fredyjbiplease help friends thinkpad T470 board CT470 series NM-A931 error post "bottom cover tamper detection error"
I've already
flashed the bios clean me and updated from the Lenovo site, then removed the switch and immediately jumped the S3 from pins 1 to 4, 2 to 3 but the problem remained the same, thank you1 Photo -
by fredyjbiplease help friends, I have 3 T490 units with the same case, the USB type C is completely dead, showing 20v 0 amp, loss of voltage VINT20_IN resistance to ground is fine, thank you
I think the problem is that I lost the voltage at PQ0008 pon 1 -PWRSHUTDOWN which should have been high which was picked up by R9512 VCC3SW, thank you very much for your help
PF0002 20v
PQ0005
pin 5 20v
pin 1.2.3 19.8v
pin 4 19.8
resistance
source & drain 2,4 m
source & gate 100k
PQ0006
pin 1.2.3 19.8v
pin 4 19.8v... -
by fredyjbiplease help friends x1 yoga 7th no display beep melody thank you...
-
Channel: BIOS Requests ONLY!
-
-
by fredyjbiplease help friends clean me bios x1 yoga 7th no display melody beep, thank you
-
Channel: BIOS Requests ONLY!
-
-
by fredyjbiPlease help friends, thinkpad t480 nm-b501 is dead, help me fix it, thank you
usb meter 20v 0.00 amp, after I took the VSYS measurement the drop was only `9.2v which should have been 10.2v I measured from a normal matherboard machine, the VSYS path resistance to ground diode mode is 1900 thank you
LINK to Schematic -> https://www.badcaps.net/forum/troubl...b501-schematic - Loading...
- No more items.
Comment