HI EVERYONE
New Members - please post your introductions here
Collapse
This is a sticky topic.
X
X
-
Hi I'm a new member. I am about to resurrect my original career as an electronics engineer and my goal is to fix Macs and have a second income doing it.Comment
-
Guest
Hey im Rob,
i was looking for various vbios and then i found this site :-)
hope i can give something back.
Kind regardsComment
-
I can't remember if I've already introduced myself because I've had a few different accounts in here but I'm Chrissy from Newcastle & I'm interested in tv repairComment
-
-
Hello fellow forum members. The main reason why I decided to join this forum was that I am starting to get into the world of micro soldering. I was working on an ASUS GL703GS laptop the other day and after having issues with the WLAN port shorting the gpu if the WLAN card was plugged in, I checked the caps and noticed 2 were missing under where the WLAN card would be seated, when looking at a picture of the same board online. I looked everywhere to find a schematic for this motherboard, and I stumbled across this forum. I am about to start reading through the schematic now, cheers everyone!Comment
-
Comment
-
Related Topics
Collapse
-
by fredyjbiplease help friends thinkpad T470 board CT470 series NM-A931 error post "bottom cover tamper detection error"
I've already
flashed the bios clean me and updated from the Lenovo site, then removed the switch and immediately jumped the S3 from pins 1 to 4, 2 to 3 but the problem remained the same, thank you1 Photo -
by fredyjbiplease help friends, I have 3 T490 units with the same case, the USB type C is completely dead, showing 20v 0 amp, loss of voltage VINT20_IN resistance to ground is fine, thank you
I think the problem is that I lost the voltage at PQ0008 pon 1 -PWRSHUTDOWN which should have been high which was picked up by R9512 VCC3SW, thank you very much for your help
PF0002 20v
PQ0005
pin 5 20v
pin 1.2.3 19.8v
pin 4 19.8
resistance
source & drain 2,4 m
source & gate 100k
PQ0006
pin 1.2.3 19.8v
pin 4 19.8v... -
by fredyjbiplease help friends x1 yoga 7th no display beep melody thank you...
-
Channel: BIOS Requests ONLY!
-
-
by fredyjbiplease help friends clean me bios x1 yoga 7th no display melody beep, thank you
-
Channel: BIOS Requests ONLY!
-
-
by fredyjbiPlease help friends, thinkpad t480 nm-b501 is dead, help me fix it, thank you
usb meter 20v 0.00 amp, after I took the VSYS measurement the drop was only `9.2v which should have been 10.2v I measured from a normal matherboard machine, the VSYS path resistance to ground diode mode is 1900 thank you
LINK to Schematic -> https://www.badcaps.net/forum/troubl...b501-schematic - Loading...
- No more items.
Comment