Hello, i'm Eric from Belgium. greetings
New Members - please post your introductions here
Collapse
This is a sticky topic.
X
X
-
Good morning Let me introduce myself, I am a woman who loves tinkering with laptops, my name is vivicool, I am 51 years old and I live in France I discovered your forum while searching for an elitbook 840 G3 bios I wish you all to find Good luck and thanks for addingāComment
-
-
-
Hello I have been doing car audio and electronics repair for 40 years thanks for letting me join .Comment
-
-
Que tal..!
Yo me llamo Henry, soy muy fanĆ”tico de la reparación de las placas de laptops y tarjetas grĆ”ficas, me intereso mucho desde que adquirĆ mi laptop Gamer que tenĆa una falla en la GPU
Soy de Ecuador, aspirante a tener el mejor taller de este bello paĆs
Estudio la carrera de Mecatrónica y me gusta este tipo de temas, asà como la robótica y electrónicaComment
-
I harbor a profound interest in the realm of reprogramming EEPROM chips, delving into the intricacies of hacking, exploring the vast possibilities of Arduino, and immersing myself in the ever-evolving landscape of technology. At a tender age of 11.5 years, I, bearing the moniker "Rmon," harbor a fervent passion for these intellectual pursuits. Moreover, I find solace and joy in the harmonious melodies of the guitar, an instrument that resonates deeply within my soul. Sorry for my poor English. Best regards.Last edited by RMON; 03-14-2024, 03:30 AM.Comment
Related Topics
Collapse
-
by fredyjbiplease help friends thinkpad T470 board CT470 series NM-A931 error post "bottom cover tamper detection error"
I've already
flashed the bios clean me and updated from the Lenovo site, then removed the switch and immediately jumped the S3 from pins 1 to 4, 2 to 3 but the problem remained the same, thank you1 Photo -
by fredyjbiplease help friends, I have 3 T490 units with the same case, the USB type C is completely dead, showing 20v 0 amp, loss of voltage VINT20_IN resistance to ground is fine, thank you
I think the problem is that I lost the voltage at PQ0008 pon 1 -PWRSHUTDOWN which should have been high which was picked up by R9512 VCC3SW, thank you very much for your help
PF0002 20v
PQ0005
pin 5 20v
pin 1.2.3 19.8v
pin 4 19.8
resistance
source & drain 2,4 m
source & gate 100k
PQ0006
pin 1.2.3 19.8v
pin 4 19.8v... -
by fredyjbiplease help friends x1 yoga 7th no display beep melody thank you...
-
Channel: BIOS Requests ONLY!
-
-
by fredyjbiplease help friends clean me bios x1 yoga 7th no display melody beep, thank you
-
Channel: BIOS Requests ONLY!
-
-
by fredyjbiPlease help friends, thinkpad t480 nm-b501 is dead, help me fix it, thank you
usb meter 20v 0.00 amp, after I took the VSYS measurement the drop was only `9.2v which should have been 10.2v I measured from a normal matherboard machine, the VSYS path resistance to ground diode mode is 1900 thank you
LINK to Schematic -> https://www.badcaps.net/forum/troubl...b501-schematic - Loading...
- No more items.
Comment