New Members - please post your introductions here
Collapse
This is a sticky topic.
X
X
-
Re: New Members - please post your introductions here
Hi guys,
I am tinkering with my lenovo ideapad 5 15alc05 for a few days by now and I hope, that there is somebody in this forum, who can help me with it. I am a student in computer science in Germany right now, so i thought that i should be capable of doing some bios flashing actionsComment
-
Re: New Members - please post your introductions here
Hello All, new to the forum but been doing component level board repair for about 6 years now, from a small island in the caribbean called trinidad, looking forward to the seeing the resources in here and interacting with allComment
-
Re: New Members - please post your introductions here
Hello, I'm a student with not really big experience in repairing/engineering, for about 2 years and 4 years. Hope to get some knowledge about certain electronics, and, well, about repairing in general, because how only one little talk with a professional showed me, there's a lot for me to know before I can even open a lid of a laptop without killing it (only if that was a little joke of mine...)Comment
-
-
Re: New Members - please post your introductions here
Heya! I'm Brett from the USA. I'm a big fan of taking things apart and breaking them! Hope you all are doing wellComment
-
-
Re: New Members - please post your introductions here
Okay why not.
Im a software programmer of over 20 years. Started out as an Art director. I hate not being able to do things like anything really So here I am. My motherboard crapped out after plugging in a powered USB hub. It's a GS76 Stealth 11-UG i9 and I love her. I hope people here can help me resurrect the beast Please allow me to soak up some of this boards knowledge in completing the taskComment
-
Re: New Members - please post your introductions here
Hello Everyone!
I found this forum when trying to figure out if I could revive my LG 55E8 ( probably not; seems to need the LED strips replaced, which is beyond my patience level ).
Seems like a great community!
From Lexington, KY USAComment
-
-
Re: New Members - please post your introductions here
Hello Eveyone,
i'm verry happy to join this forum,Comment
-
Comment
-
Re: New Members - please post your introductions here
Hi everyone,
Thanks for the Forum - long may it continue, and certainly happy to support it!
Lots of great information already - have a couple more questions to ask and look forward to doing in the main forums!
Thanks everyoneComment
-
Re: New Members - please post your introductions here
Hello i am simple electronics user.I live in Lithuania. Lithuania its small country and not to rich.We cannot afford new parts for electronic. Somtimes hawe fink hard how fix the boards self. I always traying fingeritout problems my self, but somtimes need help from other people. i think this is palce where can i fuond my ansvers.Comment
Related Topics
Collapse
-
by fredyjbiplease help friends thinkpad T470 board CT470 series NM-A931 error post "bottom cover tamper detection error"
I've already
flashed the bios clean me and updated from the Lenovo site, then removed the switch and immediately jumped the S3 from pins 1 to 4, 2 to 3 but the problem remained the same, thank you1 Photo -
by fredyjbiplease help friends, I have 3 T490 units with the same case, the USB type C is completely dead, showing 20v 0 amp, loss of voltage VINT20_IN resistance to ground is fine, thank you
I think the problem is that I lost the voltage at PQ0008 pon 1 -PWRSHUTDOWN which should have been high which was picked up by R9512 VCC3SW, thank you very much for your help
PF0002 20v
PQ0005
pin 5 20v
pin 1.2.3 19.8v
pin 4 19.8
resistance
source & drain 2,4 m
source & gate 100k
PQ0006
pin 1.2.3 19.8v
pin 4 19.8v... -
by fredyjbiplease help friends x1 yoga 7th no display beep melody thank you...
-
Channel: BIOS Requests ONLY!
-
-
by fredyjbiplease help friends clean me bios x1 yoga 7th no display melody beep, thank you
-
Channel: BIOS Requests ONLY!
-
-
by fredyjbiPlease help friends, thinkpad t480 nm-b501 is dead, help me fix it, thank you
usb meter 20v 0.00 amp, after I took the VSYS measurement the drop was only `9.2v which should have been 10.2v I measured from a normal matherboard machine, the VSYS path resistance to ground diode mode is 1900 thank you
LINK to Schematic -> https://www.badcaps.net/forum/troubl...b501-schematic - Loading...
- No more items.
Comment