Re: New Members - please post your introductions here
Hello! my name is Jim and thanks for letting me join in, fairly new to electronics so
needless to say, I have a lot of questions, first thought I would listen and learn to the best of my ability. Thank you
Re: New Members - please post your introductions here
Hello,
My name is charles. Im new to the scene but looking to fix my own laptops instead of going to apple and paying a fortune! i know basic electronics but just getting into boards and such with Macs!
Re: New Members - please post your introductions here
Hi, my name is nick_95_fhcl. I'm from Chile. I'm a law student. As hobby i like to repair things (laptops, smartphones, etc); 3D print; learn to code (frontend and backend).
Re: New Members - please post your introductions here
Hello; I am happy to be in this forum. It contains really valuable information. I will try to be a part of this community. I hope the answers I get from you will lead me to gain enough information to answer the questions of the newcomers in the future.
Re: New Members - please post your introductions here
New account here. Definitely need to get on the up and up of learning about computers and actually found this site trying to repair some monitors for my home studio. Glad to be a part of this group.
please help friends thinkpad T470 board CT470 series NM-A931 error post "bottom cover tamper detection error"
I've already
flashed the bios clean me and updated from the Lenovo site, then removed the switch and immediately jumped the S3 from pins 1 to 4, 2 to 3 but the problem remained the same, thank you
please help friends, I have 3 T490 units with the same case, the USB type C is completely dead, showing 20v 0 amp, loss of voltage VINT20_IN resistance to ground is fine, thank you
I think the problem is that I lost the voltage at PQ0008 pon 1 -PWRSHUTDOWN which should have been high which was picked up by R9512 VCC3SW, thank you very much for your help
Please help friends, thinkpad t480 nm-b501 is dead, help me fix it, thank you
usb meter 20v 0.00 amp, after I took the VSYS measurement the drop was only `9.2v which should have been 10.2v I measured from a normal matherboard machine, the VSYS path resistance to ground diode mode is 1900 thank you
Comment