Hi guys,
new SSD M.2 drive arrived today, after test all is working. Thank you all for effort and big help.
Ninel_CZ
Member
Last Activity: 02-01-2023, 02:22 PM
Joined: 12-26-2022
Location: Lysá nad Labem
-
Re: HP EliteBook Folio 1020 G1 - BIOS issue
Hi guys,
new SSD M.2 drive arrived today, after test all is working. Thank you all for effort and big help.
-
Re: HP EliteBook Folio 1020 G1 - BIOS issue
Hi,
it sounds like solution, I dont have any M2 SSD on table, I am going to buy one. Will try when it come and then I will write result. Thanks every one for effort and help.
Only one question to understand, how I was able to install OS to NVMe disk if there is no PCIe bus in PCH ?
I wrote about this in #12Last edited by Ninel_CZ; 01-15-2023, 04:10 PM.Leave a comment:
-
Re: HP EliteBook Folio 1020 G1 - BIOS issue
Hi SMDFlea,
hard to say, I newer saw the old one but by system info it was LITE ON L8T ssd 256gb, now there is PATRIOT P300 256gb. I was comparing picture of L8T and actual disk, there is difference. LITEON was B&M key but PATRIOT is M key only. Could it be the issue ?
I am IT guy more than 20 years and I never so this, how is possible to install OS to disk which is not visible in BIOS but as I wrote only install. For boot its not recognized.Last edited by Ninel_CZ; 01-15-2023, 11:36 AM.Leave a comment:
-
Re: HP EliteBook Folio 1020 G1 - BIOS issue
Hi Volinakis,
no glue, NTB is still restarting, not possible to enter BIOS setting. After first start there was some warning about factory reset then it did some data restoration about mother board ser.nr and others, after this its going to find disk and even the disk is OK, its not visible for BIOS.Leave a comment:
-
Re: HP EliteBook Folio 1020 G1 - BIOS issue
Oh man,
this is the same for me too. Its HP mystery. In BIOS system info I can see LITEON SSD even if there is physicaly PATRIOT SSD. More funy is that I was able to install win10 when system was set in UEFI hybrid mode ( with CSM ) but after instalation system wont boot from SSD. Disk isnt visible for BIOS like boot device. I was checking disk and I can see partitions with WIN and UEFI are there. I try everething to push it boot from disk but no glue. HP is
Leave a comment:
-
Re: HP EliteBook Folio 1020 G1 - BIOS issue
Hi Volinakis,
done, message about Warning disappeared but still I am not able to install OS, the same issue. When I am checking System info I can see that there is info about old original SSD but not about the new one. It could be the issue why its not possible to install OS. How can I change disk params in system info ?
P.S. I wrote you PM.Leave a comment:
-
Re: HP EliteBook Folio 1020 G1 - BIOS issue
Hi , thank you again for your fast answer.
In first i forget to write that NTB in bricked statement was without SSD M2 so I put new one to it.
For testing purpose I use your files from first reply and Voila NTB boots up.
But there is now new msg on boot screen.
Warning!! - Machine is not in comitted state!
I was trying to install win10 OS and there is msg
Windows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Ensure the disk's controller...Leave a comment:
-
Re: HP EliteBook Folio 1020 G1 - BIOS issue
Hi,
no I am not bricked it. I got it bricked. I will try to explain better
I was posting 4 files:
MX25L1673 bricked.bin - backup when it came to me ( bricked status )
winbond 25Q128 bricked.bin - backup when it came to me ( bricked status )
after this I did flash with this two files:
MX25L1673E locked MPM.bin - NTB start working but with locked MPM after flash
winbond 25Q128 locked MPM.bin - NTB start working but with locked MPM after flash
I need to unlock...Leave a comment:
-
Re: HP EliteBook Folio 1020 G1 - BIOS issue
Hi Volinakis,
thank you for fast response. First backup was done by SmartProg2 with original SW.( borrowed one ). Now I have my own RT809F. Which I will use with your files. Only one question, If I catch it right You changed and unlock files which was backuped when NTB wasnt working ( bricked status ). When it was flashed by files from this web, NTB start working but with MPM lock issue. I am going to try it but I am affraid that it will be bricked again with original bricked BIOS file.Leave a comment:
-
HP EliteBook Folio 1020 G1 - BIOS issue
Hello Masters of BIOS heaven,
I am kindly asking for your help. I had bricked HP EliteBook Folio 1020 G1, after flashing both BIOS chips by files from this site, NTB start working but I am gettin message:Embedded controller data MUD is not valid while MPM is locked. Please unlock MPM, and lock again to capture valid MUD data.
I am posting 4 files:
MX25L1673 bricked.bin - original one before flashing
winbond 25Q128 bricked.bin - original one before flashing
MX25L1673E locked MPM.bin - locked MPM after flash
winbond 25Q128 locked MPM.bin - locked... -
Re: New Members - please post your introductions here
hello bad capsLeave a comment:
No activity results to display
Leave a comment: