Re: New Members - please post your introductions here
Hello Everyone
My name is Alberto, I'm from Italy I am a computer engineering student doing boards repair as a hobby.
I am still at the start so I am not very good at it but I am always learning new things
Re: New Members - please post your introductions here
Hi, Been an observer for awhile, I have found a lot of great information here from many knowledgeable people. Thought I might try to participate a little. Thank You...
Re: New Members - please post your introductions here
Good day to all the members of this Forum, I am writing from Italy, I am a lover of electronics in general and as usually happens, acquaintances and friends turn to me for technical problems, I came here as I was looking for information to rearrange a pc of the latest generation and I notice that in this forum there are people who far exceed my current knowledge, I thought I'd sign up to maybe share a little bit of my knowledge trying to learn some of my new ones, look I'm not really a youngster, but the curiosity of the subject allows me to stay up to date even with recent techniques. To introduce myself, I am using the Google translator to write to you in English as I am not very familiar with this language and I prefer to avoid writing incomprehensible things.
please help friends thinkpad T470 board CT470 series NM-A931 error post "bottom cover tamper detection error"
I've already
flashed the bios clean me and updated from the Lenovo site, then removed the switch and immediately jumped the S3 from pins 1 to 4, 2 to 3 but the problem remained the same, thank you
please help friends, I have 3 T490 units with the same case, the USB type C is completely dead, showing 20v 0 amp, loss of voltage VINT20_IN resistance to ground is fine, thank you
I think the problem is that I lost the voltage at PQ0008 pon 1 -PWRSHUTDOWN which should have been high which was picked up by R9512 VCC3SW, thank you very much for your help
Please help friends, thinkpad t480 nm-b501 is dead, help me fix it, thank you
usb meter 20v 0.00 amp, after I took the VSYS measurement the drop was only `9.2v which should have been 10.2v I measured from a normal matherboard machine, the VSYS path resistance to ground diode mode is 1900 thank you
Comment