LC-52D85UN Software / Picture upside down

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • kleito
    New Member
    • Nov 2022
    • 5
    • United States
    #1

    LC-52D85UN Software / Picture upside down

    Howdie
    I just replaced a TCon board on this TV, and now my Picture is upsidedown.
    I do not have a remote.Is there maybe another way to change this, like a software update?( which i can never find, probably due to the age of the unit)
    I cannot find a "flip"setting in the regular set up of the TV either
    Any help is appreciated.
    TIA
    Tags: None
    • lotas
      Badcaps Legend
      • Jan 2016
      • 4477
      • Russia
      #2
      Re: LC-52D85UN Software / Picture upside down

      There may be positional resistors on the T-CON (settings may change during reinstallation), or it may be programmed into the EEPROM. Can you post a high resolution photo of your and the new T-CON.
      The software will not help you.
      Last edited by lotas; 12-01-2022, 05:10 PM.

        Comment

        • kleito
          New Member
          • Nov 2022
          • 5
          • United States
          #3
          Re: LC-52D85UN Software / Picture upside down

          Originally posted by lotas
          There may be positional resistors on the T-CON (settings may change during reinstallation), or it may be programmed into the EEPROM. Can you post a high resolution photo of your and the new T-CON.
          The software will not help you.
          Thanks
          Here are the two boards together.The Top one ist he old one
          They look identical to me.
          I also changed the mainboard since i thought this is the problem, but found the out the TCon board is the culprit.There are white jumpers on the top right, do they have anything to do with the orientation?
          Sorry, i am new to this.
          I found the TV during walking my dog, and picked it up to see if i can make it work.
          Attached Files
          Last edited by kleito; 12-01-2022, 05:43 PM.

            Comment

            • kleito
              New Member
              • Nov 2022
              • 5
              • United States
              #4
              Re: LC-52D85UN Software / Picture upside down

              sorry.Postet again
              Last edited by kleito; 12-01-2022, 05:41 PM. Reason: Double Post

                Comment

                • lotas
                  Badcaps Legend
                  • Jan 2016
                  • 4477
                  • Russia
                  #5
                  Re: LC-52D85UN Software / Picture upside down

                  No, they are not the same, the main difference is "XA" from "XQ" (these are for different panels, diagonal, model ...) and here are the resistors that can be rearranged from one place to another and the settings will change (experimentally) and this that I immediately noticed, but there may be more differences.
                  Attached Files

                    Comment

                    • kleito
                      New Member
                      • Nov 2022
                      • 5
                      • United States
                      #6
                      Re: LC-52D85UN Software / Picture upside down

                      Originally posted by lotas
                      No, they are not the same, the main difference is "XA" from "XQ" (these are for different panels, diagonal, model ...) and here are the resistors that can be rearranged from one place to another and the settings will change (experimentally) and this that I immediately noticed, but there may be more differences.
                      Wow.You are very knowledgebale.Respect.Thanks for pointing this out.I thought the description on the board would be sufficient, but this is really going into the detail.
                      Since i hook this thing up to a laptop, i just found out that i can adjust that in the settings in my Chromebook, that this is not really a problem anymore.But now i run into the issue that my picture is very dark and i cannot adjust it.
                      I am stuck and maybe just sell the TV in bits and pieces.

                        Comment

                        Previous template Next

                        Related Topics

                        Collapse
                        • garrymc123
                          Luxor TV board input board change but picture upside down
                          by garrymc123
                          Looking for some advice changed over the video input board due to bad hdmi ports but now the picture is upside down tried the service menu but can't find anything to do with flip the picture..

                          Is there anything I can do to flip the picture or do I need to change the board again..

                          Thanks
                          Garry...
                          08-29-2022, 04:53 AM
                        • Tr0ll
                          T-con suspect issue. Both ribbon cables no picture. One ribbon cable ok. (58pus8545)
                          by Tr0ll
                          Hi guys! I realized you have a lot of knowledge here so i am hoping you could point me in right direction with my odd issue.

                          The Tv is a Philips 58PUS8545/12, it had no picture but working backlights.

                          Original T-con:
                          Opened the Tv and tested to unplug one ribbon cable at a time. With this test i could see that i got fine picture on both halves as long as there was only one ribbon cable connected, with two connected picture were gone.

                          First replacement T-con:

                          I thought it might be t-con and ordered new t-con from china(supposedly tested)...
                          10-07-2023, 07:48 PM
                        • JJAAMM
                          SAMSUNG UN55KS9000F picture fades then distorts into vertical lines after 20 seconds
                          by JJAAMM
                          This was my main TV for the last 6 years. I'm not inclined to throw out a $2600 TV so quickly so I'm trying to investigate the issue.

                          Problem
                          TV was disconnected from power for 6 months during construction. When I plugged it yesterday picture was fine, after 30 seconds it dimmed then started developing horizontal lines, picture then starts to ghost vertically until it degrades into vertical streaks. TV always displays a perfect picture when cold. I can unplug TV for 5 minutes and plug it back in and picture is restored for 20 seconds. I can also keep it in standby mode...
                          07-06-2023, 06:01 AM
                        • TR103
                          Samsung TV model UE50TU: rebooting, backlight, sound, but no picture
                          by TR103
                          Hi, I have a Samsung UE50TU with:
                          - sound and backlight, but no picture
                          - when it arrived, it had a picture for a few seconds
                          - it keeps rebooting
                          - without ribbon cable between the two panel boards, it does not reboot but I have no picture
                          - without cable between mainboard and lcd panel, it does not reboot (but obviously i have no picture)
                          - when i try a tape fix, its keeps rebooting, unless I tape off pin 1 (the innermost pin). In that case it does not reboot but I have no picture.

                          - without cable between mainboard and lcd panel and with a jumpered...
                          01-22-2025, 04:12 PM
                        • Xristakis795
                          samsung la32a436t1d upside down picture
                          by Xristakis795
                          hi to all
                          i have the above model of tv and it shows the picture upside down
                          Does someone know how can i fix this problem i have do already factory reset without result ?
                          thanks in advance
                          01-19-2022, 11:07 AM
                        • Loading...
                        • No more items.
                        Working...