Change Panel Settings (Vestel 17MB230)

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • tommyaaa
    New Member
    • Nov 2022
    • 2
    • Deutschland
    #1

    Change Panel Settings (Vestel 17MB230)

    Hello everyone,

    after my TV didn't turn on anymore I decided to find the problem.
    I took my DMM and checked the power board - ok.
    Then I decided to swap the mainboard for a few bucks. (Vestel 17MB230)
    After the replacement I stumbled upon a faulty looking display image.
    The picture size an the picture itself is distorted. (shown in the pictures)
    I did some research found out, that somehow you can change the
    display settings but I only found instructions for Vestel MB1xx Mainboards, not for the MB230.
    I checked the display type on the new board: 55_VESQNDS (shown in the pictures)
    I need to change it to an 58'' type. (VES580QNDP, shown in the pictures)

    Any help is highly appreciated.
    Attached Files
    Tags: None
    • Diah
      Badcaps Legend
      • Feb 2013
      • 6357
      • Germany
      #2
      Re: Change Panel Settings (Vestel 17MB230)

      search after brand name and yours MB 17mb230 with yours panel code right firmware to flash it via USB.

        Comment

        Previous template Next

        Related Topics

        Collapse
        • 147selespeed
          Vestel 17MB230 and panel VES400UNDS-2D-N11
          by 147selespeed
          Hi,

          First, sorry for my bad English.

          I have installed this board in my TV and has a VES400UNDS-2D-N11 panel.

          The tv turn on the panel but don't show anything.I can't access in the service menu.

          Is it possible to fix it?

          My old remote control works on a Vestel 17MB97.Should it work on this one too? Turn on the tv,but since there is no image I don't know if it does something else.

          I hope you can help me. Thanks!!
          12-28-2022, 08:14 AM
        • porfyriadhs
          Vestel 17mb230 mainboard.No Sound
          by porfyriadhs
          Hello to everyone . I have a vestel mainboard 17mb230 with no sound on the speakers only on the headphones . I think that hotel mode is on but I cant find a way to fix .. Any help will be good thanks
          03-19-2024, 01:12 AM
        • howardc64
          LG 49UJ6500 LCD panel lighter band that goes away
          by howardc64
          49UJ6500 LCD panel has a lighter band on top when first powered on. Goes away (or gets much fainter) after TV on for a few min. After powered off for awhile and power back on, same band appears. If powered on immediately after powering off, no or much fainter band. Running the latest firmware.

          Disassembled the TV and lifted the LCD panel during testing. Band is on the LCD panel (can see the band on the panel as I lift it slightly) Backlight is perfectly even at the top edge. Double checked LCD panel alignment in the frame and is perfect but since band moved with the panel, its on...
          02-19-2023, 12:13 AM
        • stav242
          Vestel VES550QNUS-2D Panel issue.
          by stav242
          i just spent quite a few hours trying almost everything i could find out to check why this panel wasnt working.

          MB was detecting a fault and going into fault mode.
          i could se the AVDD go high for a second then drop to off.
          check all CAPs and diodes on bottom buffer boards.

          in the end i gave up and removed the panel, only to find burnt tracks on the cof tab..

          i learnt a lot in the process, but wont go doing all those checks first next time.

          so word of advice... if your panel is suspect, save youself a few hours and check...
          02-28-2023, 11:51 AM
        • triplefour
          SAMSUNG UN50TU8000F rebooting, backlight ok. No 12v to panel boards.
          by triplefour
          TV flashes backlight then reboots over and over. no image. Client said it used to have image for a bit before rebooting. Got worse over time.

          tcon is built into mainboard.
          Only one cable goes to panel boards.
          there is a cable from one panel board to the other that links them.
          cost cutting measure that results in us having harder time to diagnose.
          removing the link to the second panel board allows TV to stay on with stable backlight but no image.
          used cut off tape method to mask 1 maybe 2 pins on the side of the cable that goes to that second panel board....
          07-28-2022, 07:59 PM
        • Loading...
        • No more items.
        Working...